Convert_1_cubic_metre_of_aggregate_to_kg
To convert 100 kg of 20 mm aggregate to cubic meters, you need to know the density of the aggregate. The density of aggregate can vary, but a commonly used value is around 1.5 tonnes per cubic meter. So, you would divide the weight (100 kg) by the density (1.5 tonnes/m³ = 1500 kg/m³) to get the volume in cubic meters. In this case, 100 kg / 1500 kg/m³ = 0.067 cubic meters.
The weight of 10mm aggregate in 1 cubic meter depends on the density of the aggregate. On average, the density of 10mm aggregate is around 1.4 to 1.6 tonnes per cubic meter. So, the weight would be between 1,400 to 1,600 kg.
On average, a cubic meter of barley weighs around 600-700 kg.
To convert kilograms (kg) to cubic meters (m³), you need to know the density of the substance. Divide the weight in kilograms by the density in kilograms per cubic meter (kg/m³) to get the volume in cubic meters. The formula is: volume (m³) = mass (kg) / density (kg/m³).
To convert 5 grams per milliliter to kilograms per cubic meter, you need to multiply by 1000 (since 1 gram = 0.001 kg and 1 milliliter = 0.000001 cubic meters). Therefore, 5 grams per milliliter is equal to 5000 kilograms per cubic meter.
To convert 100 kg of 20 mm aggregate to cubic meters, you need to know the density of the aggregate. The density of aggregate can vary, but a commonly used value is around 1.5 tonnes per cubic meter. So, you would divide the weight (100 kg) by the density (1.5 tonnes/m³ = 1500 kg/m³) to get the volume in cubic meters. In this case, 100 kg / 1500 kg/m³ = 0.067 cubic meters.
How to convert Cubic meter to BTU
1 kg/cubic metre = 77.853 pounds/ cubic foot.
The weight of 10mm aggregate in 1 cubic meter depends on the density of the aggregate. On average, the density of 10mm aggregate is around 1.4 to 1.6 tonnes per cubic meter. So, the weight would be between 1,400 to 1,600 kg.
AnswerOne cubic feet = 40 Kilogram that is One cubic meter = 1411.50 Kg
The weight of coarse aggregate required to fill one cubic meter depends on its density, which typically ranges from 1,500 to 2,500 kilograms per cubic meter. Therefore, one cubic meter of coarse aggregate generally weighs between 1.5 to 2.5 tonnes. For example, if using a density of 2,000 kg/m³, one cubic meter would equal 2 tonnes. Always check the specific density of the material being used for accurate calculations.
Grams are a measure of weight, a square meter is a measure of area, and a cubic meter is a measure of volume. These are not comparable.
The soil density must be given to convert from a mass measure to a volume measure.Assuming a clay soil of density 1200 kg/cubic meter, then the volume is 1000/1200 cubic meter or 0.833 cubic meterAssuming a sandy soil of density 1500 kg/cubic meter, then the volume is 1000/15000 cubic meter or 0.667cubic meter
Pounds per cubic foot x 16.0184634 = kg/m3
To convert cubic meters of asphalt to tons, you need to know the density of the asphalt, which typically ranges from about 2,200 to 2,400 kg/m³. Multiply the volume in cubic meters by the density to get the mass in kilograms, then divide by 1,000 to convert to tons. For example, if the density is 2,300 kg/m³, then 1 cubic meter of asphalt would equal approximately 2.3 tons.
The medium density should given to convert from mass (kilogram) to volume (1 cubic meters). Assuming water of 1000 kg/cubic meter, than 1 cubic meter would contain 1000 kilograms,
for converting cubic meter to ton , density or specific volume is needed. specific volume unite is m3/kg. steam cubic meter/ (cubic meter/kg)= steam (kg ) /1000= tone of steam