The paper will not conduct electricity, so it will not light up the bulb. The pencil lead, on the other hand, can conduct electricity and complete the circuit, causing the light bulb to turn on.
When you turn off a light, you are breaking the circuit that allows electricity to flow through the light bulb, causing the light bulb to turn off. The electricity in the circuit is still present and will continue to flow until the power source is disconnected or turned off.
When you turn off a light bulb, the flow of electricity stops and the filament stops emitting light. As a result, the light bulb darkens and the space becomes darker.
To turn a light bulb on, you typically need electricity, a power source such as a battery or electrical outlet, and a switch or mechanism to complete the circuit. Simply screwing the light bulb into a lamp or fixture connected to a power source and flipping the switch will allow the electricity to flow and illuminate the bulb.
It goes dark It is time for bed well that a stupid answer! here's an answer a surge of electricity goes on the wire and then boom light!
The paper will not conduct electricity, so it will not light up the bulb. The pencil lead, on the other hand, can conduct electricity and complete the circuit, causing the light bulb to turn on.
When you turn off a light, you are breaking the circuit that allows electricity to flow through the light bulb, causing the light bulb to turn off. The electricity in the circuit is still present and will continue to flow until the power source is disconnected or turned off.
Electricity to visible light and heat as a by product.
When you turn off a light bulb, the flow of electricity stops and the filament stops emitting light. As a result, the light bulb darkens and the space becomes darker.
To turn a light bulb on, you typically need electricity, a power source such as a battery or electrical outlet, and a switch or mechanism to complete the circuit. Simply screwing the light bulb into a lamp or fixture connected to a power source and flipping the switch will allow the electricity to flow and illuminate the bulb.
It goes dark It is time for bed well that a stupid answer! here's an answer a surge of electricity goes on the wire and then boom light!
When electricity flows through the filament in a light bulb, it heats up due to resistance, becoming white-hot and producing visible light. This light is what we see when we turn on a light bulb.
Electricity is the type of energy that is used when you turn on a light bulb. When you leave a room, you use more energy by leaving the light on than if you turn it off and back on when you return.
The light bulb must be properly connected to a power source and the switch must be turned on. If these conditions are met and the bulb is not burnt out, it should turn on when electricity flows through it.
Check in different outlets - you may have a problem with the outlet. Check that you have electricity in your house, for example, by lighting another light bulb. If the bulb still doesn't turn on, then probably the bulb is NOT good.
If a light bulb is touched by a conductor to complete the circuit, it will turn on if the circuit is closed and working properly. The conductor helps to create a path for the electricity to flow from the power source to the light bulb, allowing it to illuminate.
When you turn off a flashlight, you break the electrical circuit that powers the light bulb. This stops the flow of electricity and causes the filament in the light bulb to stop glowing, thereby turning off the light.