It actually does not matter as long as you are consistent. Most people choose to use the white stripe as positive, but it is definately not a rule.
Any marking (a white stripe, bump molded into the cable, different wire colours) is an indication for your reference only. It doesn't matter, as long as you connect the marked side on the amplifier to the same polarity on the speaker side.
I always use the black stripe as negative signal. Always do this and then when you have to disconnect something you won't get confused.(or as confused) but honestly it's just wire it's up to you.
Gray Connector wire color stripe color dk blue = mute black/lt.green = ground lt.blue/red = panel illumination yellow/black = radio power feed black = vehicle chasiss ground lt.green/purple = memory feed BLACK CONNECTOR wire color stripe color orange/red =rt rear spk brown/pink = rt rear spk grnd dk.green/orange =rt fr spk white/lt.green =rt ft spk grnd gray/lt.blue = L rear spk tan/yellow = L rear spk grnd lt.blue/white =L ft spk orangr/lt.green = Lft spk grnd
Generally, white wires are positive. Red is usually negative. However, the construction of the electrical device could be different. It is best to check the instructions.
If you are asking about the electrical cord on a lamp, the black wire with the white stripe is the neutral conductor.
brown wire is called earth wire .or blue wire with white stripe is for anteena wire ok
The white stripe on a DC wire typically indicates a negative or ground connection. It helps distinguish the wire's polarity or function in a circuit to prevent incorrect connections.
The white stripe on clear speaker wire is usually the positive wire. You may also find it with dashes and this is still the one that will carry the positive charge.
Blue with White Stripe
Its the white wire with the violet stripe on it.
It actually does not matter as long as you are consistent. Most people choose to use the white stripe as positive, but it is definately not a rule.
It indicates the neutral or "cold" lead (wire).
The wire is white with a light green stripe on it.
Right Rear Spkr (+) Red w/ Yellow Stripe Left Rear Spkr (+) Blue w/ Yellow Stripe Power Antenna Trigger Brown w/ White Stripe +12 Volt Ignition Wire Yellow w/ Red Stripe Right Rear Spkr (-) Brown w/ White Stripe Left Rear Spkr (-) Gray w/ White Stripe Ground Wire Black +12 Volt Battery Wire White w/ Yellow or Blu Stripe Left Front Spkr (+) Blue w/ Green Stripe Right Front Spkr (+) Red w/ Green Stripe Left Front Spkr (-) Gray w/ Black Stripe Right Front Spkr (-) Brown w/ Black Stripe
well try to find if one wire has a darker color copper than the other, this would help. or if one side of the wire coat has a white stripe on it, then the stripe indicates it's positive
The ground wire of the coil. Its the white wire with a black stripe.