Whichever one you connect to the positive terminal. The colors are there so you can find the same wire at the other end.
It doesn't really matter, as long as you connect them to the same polarity at both ends. Most people use the gold or reddish-copper wire as the positive, as it is the red terminal and the silver, or non-colored lead to the negative as it is black.
In speaker connectors, the copper-colored connector is usually positive, and the silver-colored connector is negative.
No. Ni-Chrome wire is resistance wire used in pottery and as a heating element for pyrotechnics. There is no application for Home Theater for this wire.
It is better to use 16 gauge or 14 gauge speaker wire for your home theater applications.
Speaker cable can have an insulator that could be any color. The wire inside is typically silver, copper or gold colored.
The copper wire is typically positive. However, the best way to determine which is positive and negative is by referring to the user manual or guide that came with the speakers. The writing on the silver wire is likely there to indicate which wire is positive.
Whichever one you connect to the positive terminal. The colors are there so you can find the same wire at the other end.
The copper wire in silver nitrate forms a heterogeneous mixture. In this case, the copper wire does not dissolve in the silver nitrate, so they physically remain as separate substances within the mixture.
The price of copper today is $3.43 a pound. The price of silver today is $12.90 an ounce. Copper is much cheaper.
When a copper wire is placed in a silver nitrate solution, a redox reaction occurs. Copper atoms from the wire lose electrons to form copper ions in the solution, while silver ions gain electrons to form solid silver. This leads to the deposition of silver metal on the surface of the copper wire.
My PC speaker cables have a copper wire, as well as a insulated (white) copper wire. The headphones (Sony) appear to have 3 wires in them - green, red, and orange. The links you posted are more for car/home theater speaker wire.
It doesn't really matter, as long as you connect them to the same polarity at both ends. Most people use the gold or reddish-copper wire as the positive, as it is the red terminal and the silver, or non-colored lead to the negative as it is black.
Black wire to copper screw, white wire to silver screw, bare copper ground wire to green ground screw.
In speaker connectors, the copper-colored connector is usually positive, and the silver-colored connector is negative.
Yes with the proper tools you can splice two speaker wires together to extend the length of the wire. Be sure to use similar composition cable (copper to copper, silver to silver, etc) Wearing latex gloves to prevent corrosion form the oil on your skin strip 1/2in of the speaker cable sleeve on both cables. Twist the cables together and use silver solder to complete the bond. Apply heat-shrink of electrical tape to prevent the cable from shorting. Enjoy your new, longer cable.
Usually copper, sometimes gold or silver.