Shooting rifled slugs is the ONLY way to shoot thru a smoothbore for deer. If you shoot sabot slugs thru a smoothbore, it will not spin and therefore not be accurate. For accuracy, the slug must spin out of the barrel. Either shoot a rifled slug thru a smooth barrel, or shoot a saboted slug thru a rifled barrel.
yes.
In general, rifled slugs are intended to go through a smooth bore. The twist rates of a rifled slug against a rifled barrel may not agree. If you were trying to get the best out of your rifled barrel I would think that going to a saboted slug would give better performance.
You can, but, it will not be a good thing.
Rifled slugs were designed for smooth bore barrels because they lack rifling. Sabot slugs are made for rifled bores but they can fire through smooth bores with loss of accuracy. I am not sure about rifled slugs in a rifled barrel because I think the bullets rifling can improperly connect with the bores rifling and you risk scratching the barrel.
It is designed to shoot .177 Caliber pellets, not BB's. It has a rifled barrel, BB's will ruin the barrel if they are forced to shoot through it.
Yes. That's the only type of shotgun you should fire a sabot slug from. Rifled shotguns are intended for rifled slugs only. Actually, the opposite is true. Rifled slugs are preferred for smooth barreled shotguns. The 'rifling' on the slug is actually just fins that permit the slug to squeeze through the choke on the shotgun barrel. Sabot slugs are intended for rifled barrels, as they will give better accuracy. Some sabots may be used in smooth barrels, but you are paying more for sabots and not getting the accuracy you would get by using a sabot in a rifled barrel.
Rifled Slugs are meant for smooth bore barrels mainly. The rifled slug is made of lead and so if you shoot it through a rifled barrel the lead touching the rifling will cause some of the lead to peal off and can build up over a very short period of time. Also the facft that you are shooting a rifled slug through a rifled barrel would cause the bullet to become extremely unstable and inaccurate. Rifle barrel sare meant for sabot slugs (slugs with a plastic wad surrounding the outside). You should eb good though to shoot a rifled slug out of your barrel with a mod choke tube, but smooth bore deer barrels are ideal.M.I.
NOPE. with out rifling, be it barrel or slug itself, there would be no spin on the slug. You would have minimal accuracy.
In short, it is a barrel designed to fire slugs. Some are smooth bore which are intended to shoot rifled slugs or buckshot, while others are rifled and intended for shooting sabot slugs only. This is a very good and trusted answer. lcj
Depends on what the barrel is choked.
Rifled slugs are made of soft lead purposely for use in smooth bore shotguns. Actually the "rifling" on the slug deforms to allow the slug to pass through the choke in the bore. If your firearm is of modern manufacture and in good condition it should be safe. Of course it goes without saying that you must use the appropriate type (i.e 2-3/4", 3", etc.) and gauge (410, 20, 12 etc.) of ammunition for which your firearn was designed. If in doubt, have a reputable gunsmith check it out for you.
yes you can shoot rifled slugs through smooth bore barell, or use rifled choke for sabots. the sa08 takes the same choke as mossberg...win, etc.