0
Hopefully you stopped once you realized it was stripped.
If you did then your best option is to use a T7 driver and first tighten it (turn it clockwise) so that it can grab onto the un-stripped portion of the head.
Then turn it (anti-clockwise) to loosen. Hope this helps.
I tried this on my stripped screw on the Juliets and it worked.
If it is stripped real bad and you went at it a few times then ideal would be to walk into an optical store and see if they can do it for you.
cheers!
Add your answer:
Earn +20 pts
Your Oakley Juliet is getting loose in the center of the frame The screws are polished Is there a way to tighten it?
Yes, you can use a small screwdriver to tighten the screws on your Oakley Juliet sunglasses. Be careful not to overtighten as it may damage the frame. If the issue persists, you may want to contact Oakley for further assistance.
How do you remove Recon CS-6 stripped screws?
Good luck removing a stripped screw from plastic. There are ways, but I'm not going to discuss because you'll probably burn your house down.
How do you fix a stuck carb needle on a Yamaha Warrior 350 when the screws on the float bowl are stripped?
Remove them with some WD-40 and some vice grips.
How do you remove a mirror from a 1990 Ford Ranger when screws are stripped?
drill screw head out with 1/4 " drillbit mirror mounting plate can be removed by removing door panel. replace with new monting plate if threads are stripped in mounting plate. just did this myself
How do you remove plastic screws a holding rear license plate light housing in a 2000 Mercury Villager?
Just unscrew them, there's no trick to it. If they're stripped pry under the edge with a knife to get them to back out.
How can you get the air cleaner housing open on a 1994 Intrepid if the screws are stripped and wont come out?
Use a socket wrench. Mine are stripped too (that is the Phillips screwdriver part). but a socket will work
How to change a 96 Camero headlight?
remove the torx head retaining screws and remove the bezel. remove retainer screws but dont touch the adjustment screws and pull out headlight then unplug . replace light, plug it in and secure it. then replace bezel and its retaining screws.
How do you remove front speakers in a Mitsuibishi Mirage?
Remove the speaker covers, by loosening the retaining screws. Remove the speaker retaining screws. Remove the wiring harness. The speakers will come out.
How to do you install the passenger mirror on a 98 Dodge Stratus?
remove door panel then remove screws behind mirror. remove door panel then remove screws behind mirror.
How do you change the brake lights on a 2004 Rio Cinco?
Remove inside panel and remove the screws. If there are no screws then pry it out with a screwdriver.
How do you change the headlight on an 88 Honda accord?
# Disconnect negative battery cable # Remove the retaining screws and detach the headlight bezel # Remove the headlight retainer screws taking care not to disturb the adjusting screws # Remove the retainer and pull the headlight out enough to allow the connector to be unplugged # Remove headlight now # Disconnect negative battery cable # Remove the retaining screws and detach the headlight bezel # Remove the headlight retainer screws taking care not to disturb the adjusting screws # Remove the retainer and pull the headlight out enough to allow the connector to be unplugged # Remove headlight now
How do you remove Tahoe overhead console?
You will need to remove the headliner. With the headliner removed you will be able to see the overhead console retaining screws. Remove the retaining screws.
