No, the bulb will not glow when connected to a battery if the filament is broken. The filament is the part of the bulb that heats up and produces light when electricity passes through it. If the filament is broken, there is no path for the electricity to flow through and generate light.
If the filament of a bulb is broken, it is referred to as a "burnt out" or "blown" bulb. This means that the filament, which is the thin wire inside the bulb that produces light when electricity passes through it, is no longer connected and the bulb cannot function properly.
The filament of a light bulb allows electrical energy to be converted into radiant energy in the form of light and heat. When electricity flows through the filament, it heats up and emits light through a process called incandescence.
Yes, a light bulb is a source of light. When current is going through the filament the resistance generates enough heat that the filament glows, producing light.
The wire inside a light bulb is called a filament. It is typically made of tungsten and emits light when an electric current passes through it, heating it up to produce light.
No, the bulb will not glow when connected to a battery if the filament is broken. The filament is the part of the bulb that heats up and produces light when electricity passes through it. If the filament is broken, there is no path for the electricity to flow through and generate light.
If the filament in a light bulb breaks, the circuit is interrupted and the light bulb will no longer illuminate. This is because the broken filament is unable to produce light when electricity flows through it.
If the filament of a bulb is broken, it is referred to as a "burnt out" or "blown" bulb. This means that the filament, which is the thin wire inside the bulb that produces light when electricity passes through it, is no longer connected and the bulb cannot function properly.
When the filament in a light bulb is broken, it creates an open circuit, which interrupts the flow of electricity. Without a complete circuit, the electricity cannot pass through the filament to produce light. As a result, the light bulb does not illuminate.
If the tiny wire in a light bulb breaks, the circuit will be interrupted and the light bulb will stop working. The wire, called a filament, is responsible for producing light when electricity passes through it. Without the filament intact, the bulb cannot generate light.
A fused bulb does not glow because the filament of a fused bulb is broken. Since current can't flow through the filament, it can't get hot enough to glow.
When a light bulb burns out, it means that the filament inside the bulb has broken or worn out, disrupting the flow of electricity and causing the bulb to stop producing light. The bulb will no longer work until the filament is replaced.
No, once a bulb has fused, the filament has likely broken and there will be no more electrical conductivity through the bulb.
An incandescent light bulb uses a filament that produces light by heating it until it glows. This type of light bulb emits a warm and yellowish light.
After a light bulb blows, the metal filament usually breaks due to the heat and stress it endured during operation. The broken pieces may remain inside the bulb or fall to the bottom, depending on how it fails.
In an incandescent light bulb the wire that gives off the light is called the Filament.
The coiled filament in a light bulb is typically located at the center of the bulb inside the glass envelope. This filament is what heats up and produces light when an electric current passes through it.