0
Sea water CAN be used to extinguish mountain fires but it isn't necessarily the best choice because it is salty enough to make it harder for plants to recover after the fire and because it may not be the closest source of large quantities of water. Also - scooping up water from the ocean with all the waves is more difficult than from a flatter body of water such as a lake.
*****
To add my bit: The water would do its job and help put out the fires. The downside is that the salt contents would affect the area and could inhibit future regeneration in the short term. It should be remembered that forest fires would happen naturally. It is only in death and the destroying of property that affects mankind. - nature will always recover. Sometimes humans believe that nature depends on them. Nature would get along quite happily without mankind.
Add your answer:
Earn +20 pts
Do you use CO2 to extinguish Liquid Fire?
No, using carbon dioxide (CO2) to extinguish liquid fires is not typically recommended. CO2 is more effective for electrical fires or fires involving flammable gases. For liquid fires, it's usually better to use foam, water, or dry chemical extinguishers.
What Safety measures are taken to extinguish different types of fires?
For a grease fire, use a fire extinguisher specifically labeled for grease fires or smother the fire by placing a metal lid over the pan. For an electrical fire, turn off the power source if safe to do so and use a Class C fire extinguisher. For a wood or paper fire, use a Class A fire extinguisher or water to extinguish the flames.
What can be used to extinguish a fire at a gas station?
Fire extinguishers containing dry chemical powder or carbon dioxide are commonly used to extinguish fires at gas stations. It is important to never use water on a gas station fire because it can spread the flames. In case of a large fire, it is best to evacuate the area and let trained firefighters handle the situation.
How much water is needed to extinguish a fire?
The amount of water needed to extinguish a fire depends on the size and type of fire. Generally, a good rule of thumb is to use at least 1 gallon of water per square foot of fire. However, for larger fires or fires involving chemicals, more water may be required. It is always best to use caution and consult with local fire authorities when dealing with a fire.
Why washing soda not used to extinguish fire?
Washing soda (sodium carbonate) is not typically used to extinguish fires because it does not have the same cooling or smothering effect as substances like water, foam, or carbon dioxide. While it can help control certain types of fires by inhibiting combustion reactions, it is not as effective as other fire extinguishing agents. Additionally, using washing soda could potentially create its own set of safety hazards when dealing with fires.
How do Amish people extinguish fires?
The same way we do, they use water.
Why should i not use a water extinguisher on elextricity fires?
Water conducts electricity; therefore, using water to extinguish an electrical fire can result in electrocution.
Why you should not use water to extinguish fires caused due to electrical short circuits?
Water is a conductor of electricity, and carries the electrical current. That being said, there is always a risk for electrocution when attempting to extinguish an electrical fire using water.
How many gallons of water does it take to put out one gallon of -Jet A- fuel on fire?
You do not use water to extinguish fuel fires. Water will only spread it.
How doe fire companies extinguish fires if everyone has a well water?
They normally take a tanker truck to homes in countryside.
Why can't water quench fire?
It depends what the fuel source is ! Water can extinguish even large forest fires - if you use large enough quantities of it !
Can water vapour make fuel burn?
No, water vapor does not burn. In fact, water vapor is often used to extinguish fires by removing heat and lowering the temperature.
What class fires involve combustible metals such as sodium titanium and magnesium.?
Those are class D fires. They can be very hard to extinguish, and require that they be buried or a special extinguishing agent be used. Those fires are not affected by water.
How can white phosphorus be extinguish?
it has to be smothered or burned up
Why can't water quench large fire?
It depends what the fuel source is ! Water can extinguish even large forest fires - if you use large enough quantities of it !
What do you use to extinguish a smoking computer?
A 'dry powder' extinguisher. Water or foam extinguishers will destroy the circuits (and shouldn't be used on electrical fires).
Water will not extinguish most flammable liquid fires?
That's correct. Water can react with flammable liquids, spreading the fire instead of extinguishing it. It is best to use a fire extinguisher specifically designed for flammable liquid fires, such as a foam or CO2 extinguisher, to put out these fires effectively.
