Depends on the application but rubber, before it sets, can fill in tiny spaces on the metal. As it sets it'll expand and grab onto those scratches, dents or any other type of texture.
Sometimes it's a chemical bonding.
A two-part epoxy adhesive that is specifically designed for bonding rubber to metal is often the best choice. Make sure to clean and roughen the surfaces for better adhesion, and follow the manufacturer's instructions for the adhesive for best results. It's also a good idea to consider the temperature range and durability needed for the specific application.
Rubber is soft, non-conducting and not malleable and is a compound produced by plants. Metals are hard, malleable and conductive and are naturally occurring elements, often combined with other metals to make alloys.
with semen
^ (very inappropriate why are people so wierd.... a typical answer would be you can melt them together... dont listen to whatever this jerk says)
CX-948 Rubber Adhesive
Another possibility is a product called Pliobond.
Covalent bonding between the C and H atoms
To join metal to plastic, epoxy is best.
To glue metal to rock, you can use a strong adhesive like epoxy or construction adhesive. Make sure to clean and roughen the surfaces of both the metal and rock for better adhesion. Follow the instructions on the adhesive carefully for the best results.
A solvent glue is a type of adhesive that uses a solvent, such as acetone or ethyl acetate, to dissolve and bond materials together. The solvent evaporates as the glue dries, leaving behind a strong bond between the surfaces. Solvent glues are commonly used for bonding materials like plastic, rubber, and metal.
A metal epoxy adhesive or a cyanoacrylate super glue designed for metal surfaces are good options for bonding metal to metal. Make sure to clean and roughen the surfaces before applying the glue for a strong bond. Follow the manufacturer's instructions for best results.
A type of glue commonly used to fix rubber eye pieces on binoculars is rubber cement or silicone adhesive. These types of adhesives are suitable for bonding rubber and provide a strong and flexible hold. It's always a good idea to follow the manufacturer's instructions when using any adhesive.
Cyanoacrylate adhesive, also known as super glue, is commonly used to bond zylonite to itself due to its fast-drying and strong bonding properties. Make sure to clean and roughen the surfaces before applying the adhesive for maximum effectiveness.
PL Premium is very good for that .
Try this web site, there are more just do a google search http://www.best-deal.com/search/landing/query/wood+to+metal+adhesive/s/google/koid/4172337202/?query=wood+to+metal+adhesive&gclid=CKvLy8rS0LcCFWlp7AodWnQAMA
Use 'Slime' rubber glue for this.
There are quite a few glues that do this. -My favorites are 'Slime' rubber adhesive and Aqua Seal neoprene adhesive.
To glue metal to rock, you can use a strong adhesive like epoxy or construction adhesive. Make sure to clean and roughen the surfaces of both the metal and rock for better adhesion. Follow the instructions on the adhesive carefully for the best results.
Try a silicone adhesive, such as Devcon. This adhered well to a %100 soft silicone rubber part I needed to glue onto some insoles.
A strong adhesive like epoxy resin or a heavy-duty cyanoacrylate glue (super glue) should work well to adhere metal to cork. Be sure to follow the manufacturer's instructions for the best results.
Use 100% silicone adhesive like PL700.
To remove crazy glue from rubber, you can try soaking the affected area in warm, soapy water for a few minutes to soften the adhesive. Then, gently peel or scrape off the glue using a soft cloth or a plastic scraper. Alternatively, you can use a commercial glue remover specifically designed to dissolve adhesive bonds without damaging the rubber surface.
"Super Glue" is a brand name for a type of cyanoacrylate adhesive, while "Krazy Glue" is another brand that also sells cyanoacrylate adhesives. Both products are very similar and are used for instant bonding of materials such as metal, plastic, and rubber.
A solvent glue is a type of adhesive that uses a solvent, such as acetone or ethyl acetate, to dissolve and bond materials together. The solvent evaporates as the glue dries, leaving behind a strong bond between the surfaces. Solvent glues are commonly used for bonding materials like plastic, rubber, and metal.
Silicone glue is a type of adhesive that contains silicone as the main component. It is known for its flexibility, resistance to high temperatures, and waterproof properties. Silicone glue is commonly used for sealing, bonding, and repairing various materials including glass, metal, rubber, and plastics.