A 194 series bulb typically draws around 0.25 amps of current. This may vary slightly depending on the specific bulb manufacturer and design.
The 25-watt bulb is brighter than the 10-watt bulb because the wattage of a bulb corresponds to the amount of energy it consumes and the light output it produces. A higher wattage generally means a brighter light.
The 100W bulb emits more light energy per second than the 40W bulb, so it appears brighter due to the higher intensity of light. This increase in brightness is a result of the higher power consumption and light output of the 100W bulb compared to the 40W bulb.
A 100W bulb will generally glow brighter than a 75W bulb because it consumes more power and emits more light. The higher wattage means that more energy is being converted into light, leading to a brighter glow.
The brightness of a light bulb directly has no direct relationship with magnets and wire. The bulbs brightness is determined by the wattage of the bulb. The higher the wattage of the bulb the brighter the bulbs light output.
They are the exact same size and you can use them interchangeably. The diffence is that the 168 will be brighter than the 194. Although it is brighter, the 168 will not last as long (1500 hrs) as the 194 2500 hrs. - edit - The 168 has 3 candle power vs the 194 with 2. Since the 168 is slightly brighter it produces a bit more heat (3.8 vs 4.9 watts). In most situations where 194's are specified you should use an exact replacement to avoid heat damage from the hotter 168 bulb.
The Shorter the wire the brighter the bulb ! Because if it is short then it get brighter and the more batterie the brighter the bulb ! Or the lower voltage the brighter the bulb !
no
Remove the 2 screws that hold the plastic lens, pull out burned bulb, push in new one (#168 or #194), verify if working, reinstall lens.....
If the current is stronger then the bulb will be brighter.The reading is much easier when you sit under the brighter bulb.
more battery's or a better bulb.
A 194 series bulb typically draws around 0.25 amps of current. This may vary slightly depending on the specific bulb manufacturer and design.
That does not depend directly on the brightness of the bulb, it depends on the current drawn by the bulb (which depends on the efficiency of the bulb). For example an incandescent bulb will draw much more current than a much brighter CFL bulb or LED bulb. Therefor switching to an brighter LED bulb can make the battery last much longer while switching to a brighter incandescent bulb will make the battery run down quicker.
The bulb will get brighter
The reading on a light bulb indicates the amount of power required to produce light. The higher the reading, the brighter the bulb will shine.
pop off the carpet trim from the trunk hatch. there are three 8mm or 10mm nuts that hold the upper license plate trim containing the bulbs. the center one also holds the trunk latch. remove these and pull the whole assembly out. the bulb holder twists out. replace with a 194 bulb. use LED 194 bulb for longer life and brighter light. you can also get different colored bulbs to customize @ www.superbrightleds.com
194