add flour to it. if it makes other things (sauces) thicker, than it could do the same for water. other than adding a powder i think its impossible to thicken water. it might get a higher density in pressure, but i dont know
To increase the density of a substance to 1.5, you can add a denser material to it. This could include adding a denser liquid or solid component that will increase the overall mass of the substance without significantly impacting its volume. By carefully measuring and adding the denser material, you can achieve the desired density of 1.5.
To increase whats density??
The increase in temperature caused the density of the water to decrease. As the temperature rose from 4°C to 20°C, the volume of the water expanded slightly while the mass remained constant. This resulted in a lower density at the higher temperature.
The density of the object is 3 grams per milliliter (15 grams / 5 milliliters).
Density of a substance typically decreases as temperature increases. Therefore, if the density of methanol at 20°C is 0.792 g/cm³, it is likely to be slightly higher at 15°C due to the cooling effect. However, the specific value would depend on the thermal expansion characteristics of methanol.
To find the density, divide the mass of the rock (15 grams) by its volume (30 milliliters). Density = mass/volume, so in this case 15 grams / 30 milliliters = 0.5 grams per milliliter. Therefore, the density of the rock is 0.5 g/mL.
The mass of a 15 ml sample of mercury would be approximately 166.5 grams. Mercury has a density of 13.6 grams per milliliter, so by multiplying the volume (15 ml) by the density, you can calculate the mass.
The increase in temperature caused the density of the water to decrease. As the temperature rose from 4°C to 20°C, the volume of the water expanded slightly while the mass remained constant. This resulted in a lower density at the higher temperature.
An increase in kVp by 15% must be accompanied by a reduction in mAs by 50% in order to maintain radiographic density. Inversely, a reduction of 15% in kVp must be accompanied by an increase in mAs by a factor of 2 (Doubling).
10% = 202.09, 5% = 101.045. Just add these...
45
15+15+15+15=60
AR 15 Uppers are used for killing various things. Uppers are the barrel of the gun. They increase accuracy and add customization towards the gun in question.
15 add 20 = 35
Percentage of increase from 11 to 15 is about 36.37%.
density = mass/volume density = 15/20 = 3/4 units/ml
The density of heavy fuel oil bunker at 15 degrees Celsius typically ranges from 0.95 to 1.03 grams per cubic centimeter, depending on its composition and grade. It is important to consult the specific technical data sheet or supplier for the exact density of the particular product in use.
Increase 75 by 15%: = 75 + (15% * 75)= 75 + 11.25= 86.25
15% increase on 100 = 115.