0
What tool would be used to measure the water depth at the edge of a pond?
Wiki User
∙ 6y ago
A fathometer.
Hulda Pouros
Wiki User
∙ 13y agoIt depends on the pond. There are several ways.
A device that bounces sound waves down and measures the time it takes to return, then calculates the distance based on the known speed of sound in the medium. These may be called fish finders, fathometers, echo sounders.
I do not know if the readout is in meters or not.
If the pond is not very deep, you could stick a long pole in the water and mark when you get resistance. Measure the length in meters. If the end stuck into the mud, then you'd need to measure from where the mud stops, to your mark.
Or you could drop an anchor or other weight, tied to a rope, and mark it when you get slack in the line.
Wiki User
∙ 12y agoProbably metres or feet, depending on where you're from
Wiki User
∙ 10y agoA fathometer.
Wiki User
∙ 9y agoAstrolab
Wiki User
∙ 11y agono
Wiki User
∙ 11y agogallons
Wiki User
∙ 12y agoMetre.
Add your answer:
Earn +20 pts
What is the unit of measure of a bowl?
well there are several ways to do this 1 is to measure the amount of water it displaces when you fill a bucket of water up to the brim and then submerge the ball in the bucket recording the volume of the water spilling over the edge 2 another way would be to take the radius which is just the width of the thickest part of the bowling ball divided by 2 and input the radius value into ((4/3)(pie•radius^3))=volume
What types of shrubs commonly grow on the water's edge?
The type of shrub that grows commonly along the water's edge completely depends on the location and climate. With that being said, a common shrub that grows along the water's edge in southern Ontario, Canada are Junipers and Willows.
How do you measure routerbit size?
To measure the size of a router bit, you can use a set of calipers or a ruler. Measure the diameter of the shank (the part that goes into the collet) for the overall size, and measure the cutting diameter (the width of the cutting edge) for the specific cutting size.
What would you use to measure the width of a page of text?
You can use a ruler or a measuring tape to measure the width of a page of text. Simply place the ruler or measuring tape along the edge of the page and note the measurement where the text begins and ends.
You took a running leap off a diving platform You were running at 3.0 ms and hit the water 2.5 s later How high was the platform and how far from the edge of the platform did you hit the water?
Ignoring air resistance, height = 30.625 metres - which is high - men's Olympic high diving is from 27 metres.You would hit the water 7.5 metres away.
What unit should be used to measure the thin edge of a dime?
The unit you should use to measure the thin edge of a dime would be millimeters.
What are tools you use while measuring a puddle?
You can use a ruler or measuring tape to measure the diameter of the puddle. A string can also be used by laying it along the edge of the puddle and then measuring the length of the string. Additionally, a depth gauge can help you measure the depth of the puddle accurately.
What has height width and depth?
An edge* * * * *No. An edge is a line, which is a 1 dimensional concept. A solid object (a 3-dimensional object) will have height, width and depth.
How do you measure the cloth?
To measure cloth, you would typically use a measuring tape and lay the cloth flat on a surface. Then, measure the length and width of the cloth in inches or centimeters to get the accurate measurements. Remember to measure from edge to edge for an accurate result.
The measure from the center of a circle to its edge?
The measure from the center of a circle to its edge is the radius.
Do you measure with the nose of a ruler or the edge?
the edge
Where would the water be if you were standing on a headland?
at the edge f the water side
How do you find the length of the edge of a cube?
Depends on what information you do have. But I would suggest you measure it using a ruler, tape measure or similar.
How do you measure a chamfer?
A chamfer is a beveled edge that joins two surfaces. The tool used to measure a chamfer would be a caliper.
What is the unit of measure of a bowl?
well there are several ways to do this 1 is to measure the amount of water it displaces when you fill a bucket of water up to the brim and then submerge the ball in the bucket recording the volume of the water spilling over the edge 2 another way would be to take the radius which is just the width of the thickest part of the bowling ball divided by 2 and input the radius value into ((4/3)(pie•radius^3))=volume
Explain two ways to find the volume of a plastic cube?
Measure the length of the edge of the cube and multiply this by itself 3 times.Fill a measuring jug with enough water to cover the cube. Measure the level of water. Immerse the cube in the water in jug and measure the level of the water. The difference in level is the volume of the cube.
How would someone measure their refrigerator to find the correct counter depth?
You would need to measure the space from the wall from where the back of the refrigerator will be out to the edge of the nearest cabinet. Measure it twice to make sure you have the right measurements. Also don't forget that refrigerators need ventilation space. So when you get to the store check the brand you are looking at and see what the requirement is as to how far away from the wall it must sit. Then you will be able to adjust your measurements to meet the requirements. And don't forget to measure the height and width of your space too.
