0
Hard to answer this question with out the load type and amperage. Depending on the type of load some wire feeders have to be increased by 25%. For a correct answer state what the three phase load is and its wattage or amperage.
Before you do any work yourself,
on electrical circuits, equipment or appliances,
always use a test meter to ensure the circuit is, in fact, de-energized
IF YOU ARE NOT REALLY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS.
For a 40 amp 220 volt circuit, you will typically use 8 gauge wire for copper conductors or 6 gauge wire for aluminum conductors. However, it's always best to consult with a licensed electrician to ensure the proper wire size for your specific installation.
A #8 copper conductor with an insulation factor of 90 degree C is rated at 45 amps.
Add your answer:
Earn +20 pts
What size wire is required for a 220 volt at 54 amps?
For a 220 volt circuit at 54 amps, you would need a wire rated for at least 6 AWG (American Wire Gauge) size to handle the current safely. It's always recommended to consult with a licensed electrician or refer to local electrical codes for specific requirements.
What size wire for 220 volt dryer from breaker to outlet?
For a 220 volt dryer, a 10-gauge wire is typically used for the connection from the breaker to the outlet. It is important to ensure that the wire matches the amperage rating of your breaker to maintain safety and efficiency in the circuit. Consulting local electrical codes and a professional electrician is recommended for accurate specifications.
Can you use a neutral wire from a existing 110 volt 20 amp circuit to supply a neutral for a washer dryer combo that has only a 220 volt 30 amp 2 wire?
No !
What wire size for 220 volt 10 amp?
For a 220 volt, 10 amp circuit, you can use 14 gauge wire if the circuit is protected by a 15 amp breaker or fuse. However, it's always a good idea to consult local electrical codes and regulations to ensure the correct wire size for your specific situation.
What size in a 90 amp 220 volt circuit?
A 90 amp 220 volt circuit would typically require a wire size of at least 4 AWG (American Wire Gauge) for copper conductors or 2 AWG for aluminum conductors to safely handle the current without overheating. It is important to consult with a qualified electrician to ensure proper wiring size and installation according to local electrical codes.
What is the recommended wire size for a 220 volt circuit according to the 220 volt wire size chart?
The recommended wire size for a 220 volt circuit according to the 220 volt wire size chart is typically 10 gauge wire for a circuit with a maximum of 30 amps.
What is the recommended wire size for a 220-volt electrical circuit?
The recommended wire size for a 220-volt electrical circuit is typically 10-gauge wire.
What is the recommended wire size for a 30 amp 220 volt circuit?
The recommended wire size for a 30 amp 220 volt circuit is typically 10 gauge wire.
What is the appropriate wire size for a 220 volt 30 amp circuit?
The appropriate wire size for a 220 volt 30 amp circuit is typically 10 gauge wire.
What is the appropriate wire size for a 220 volt circuit with a 30 amp capacity?
For a 220 volt circuit with a 30 amp capacity, the appropriate wire size would be 10 gauge wire.
What is the appropriate wire size for a 220 volt circuit with a 40 amp load?
For a 220 volt circuit with a 40 amp load, the appropriate wire size would be 8 AWG (American Wire Gauge) copper wire.
What size wire for an 80 amp 220 volt circuit?
# 3 gauge
What size wire is required for a 220 volt at 54 amps?
For a 220 volt circuit at 54 amps, you would need a wire rated for at least 6 AWG (American Wire Gauge) size to handle the current safely. It's always recommended to consult with a licensed electrician or refer to local electrical codes for specific requirements.
What size wire for 220 volt dryer from breaker to outlet?
For a 220 volt dryer, a 10-gauge wire is typically used for the connection from the breaker to the outlet. It is important to ensure that the wire matches the amperage rating of your breaker to maintain safety and efficiency in the circuit. Consulting local electrical codes and a professional electrician is recommended for accurate specifications.
Can you use a neutral wire from a existing 110 volt 20 amp circuit to supply a neutral for a washer dryer combo that has only a 220 volt 30 amp 2 wire?
No !
What wire size for 220 volt 10 amp?
For a 220 volt, 10 amp circuit, you can use 14 gauge wire if the circuit is protected by a 15 amp breaker or fuse. However, it's always a good idea to consult local electrical codes and regulations to ensure the correct wire size for your specific situation.
What size in a 90 amp 220 volt circuit?
A 90 amp 220 volt circuit would typically require a wire size of at least 4 AWG (American Wire Gauge) for copper conductors or 2 AWG for aluminum conductors to safely handle the current without overheating. It is important to consult with a qualified electrician to ensure proper wiring size and installation according to local electrical codes.
