RIP (Routing Information Protocol) is a distance-vector routing protocol that uses hop count as its metric for path selection. RIP routers broadcast their entire routing table every 30 seconds as a broadcast. RIP is classified as a classful routing protocol, meaning it does not support the use of VLSM (Variable Length Subnet Masking) and requires all devices in a network to use the same subnet mask.
RIP (Routing Information Protocol) uses hop count as the metric. It measures the distance to a destination network based on the number of routers (hops) that a packet has to traverse to reach the destination.
RIP (Routing Information Protocol) uses the hop count metric to determine the best path to a destination network. A hop count is the number of routers that a packet must pass through to reach its destination. RIP prefers routes with the fewest hops.
The metric value for a route is typically assigned based on the cost associated with reaching that destination. In this case, the metric of 1 for the route to 172.17.0.0 indicates it is the most preferred route with the lowest cost, while the metric of 2 for the route to 172.18.0.0 suggests it is a slightly less preferred path with a higher cost. This metric value can be influenced by factors such as the number of hops, bandwidth, latency, or administrative preferences set by the network administrator.
No, you should NOT try to you swim against a rip current or rip tide. You will NOT usually make it back to shore. Instead, you should swim perpendicular to the rip. It will carry you down shore, but you'll get to shore safely.
Routing Information Protocol (RIP)
16
rip is short for routing information protcol it is a routing protocol that shared routing tables from 1 router to another to a maximum of 16 hops of 16 routers
RIP is a protocol used by routers to exchange information about their routing tables. In dynamic routing, a router learns from other routers about possible routes by advertising what they know. RIP is a protocol that can do that.
30 Seconds
Distance vector protocols are routing protocols that use the distance and direction to a destination network to make routing decisions. Examples include RIP (Routing Information Protocol) and EIGRP (Enhanced Interior Gateway Routing Protocol). These protocols share routing information with neighboring routers and update their routing tables based on the information received.
it will append the update information to the routing table
it will append the update information to the routing table
Every 20 Milliseconds it updates.
Split horizon with poison reverse.
A hop. :)
Particulars RIP V1 RIP V2 VLSM Support NO Route Propogation Mechanism Broadcast (255.255.255.255 ) Multicast (224.0.0.9) Authentication Mechanism No Yes ( Text & MD5 )----RIP V1-----> Classful routing protocol.RIP V2-----> Classless routing protocol.-----------------------------------------------------RIP V1------> Subnet masks are NOT included in the routing update.RIP V2------> Subnet masks are included in the routing update.-----------------------------------------------------RIP V2 is actually an enhancement of RIP V1's features and extensions raether than an entirely new protocol.