Acetone is a commonly used organic solvent for handling Potassium Fluoride. It is polar, miscible with water, and can efficiently dissolve Potassium Fluoride.
Toluene, benzene, or hexane are suitable organic solvents for determining the density of diphenyl.
No, dpm (Dipropylene glycol methyl ether) is not an organic solvent. It is a colorless liquid commonly used as a solvent in various applications including paints, inks, and coatings.
Organic solvent can be an oxidizing agent in some circumstances but usually is not. All hydrocarbon solvents, chlorinated hydrocarbons and ethers are not for example.
No acetone is an organic ketone solvent.
Methanol is suitable for precipitating polystyrene because it is a good non-solvent for polystyrene. When added to a polystyrene solution, methanol reduces the solubility of polystyrene, causing the polymer to precipitate out of the solution. This allows for the isolation of the polystyrene from the solvent.
Glacial Acetic Acid
Acetone is a commonly used organic solvent for handling Potassium Fluoride. It is polar, miscible with water, and can efficiently dissolve Potassium Fluoride.
Thermocol is another name for polystyrene (PS), which is a type of plastic. Benzene is an industrial solvent, and it's primary use is to make styrene. The chemical structure of benzene, a non-polar organic hydrocarbon solvent, and of PS is such that benzene will dissolve styrene and polystyrene.
Iodine itself is not conductive. However, when iodine is dissolved in a suitable solvent such as water or an organic solvent, it can form an electrolyte solution that can conduct electricity.
Toluene, benzene, or hexane are suitable organic solvents for determining the density of diphenyl.
Some adhesives act as solvents. For example, toluene is a solvent for polystyrene; it can be used to cause polystyrene parts to "melt" together, forming a permanent bond when the solvent evaporates. Xylene is a similar solvent/adhesive.
When polystyrene (a plastic) is in contact with acetone, it can dissolve or soften the polystyrene. This is because acetone is a solvent that can break the bonds within the polystyrene polymer, causing it to swell or dissolve.
The pressed polystyrene top was likely used to prevent the escape of any fumes or vapors produced during the reaction between the acid and base solutions. Polystyrene is a good material for covering containers as it forms a tight seal and is resistant to chemicals. This precaution can help ensure the safety of the experimenters and prevent any potential contamination of the surroundings.
No, I don't suppose, because Polystyrene is a not a good solvent for polar compounds like sugar, itself being totally nonpolar.
Gasoline is an organic solvent
no,trimyristin does not dissolve in water....ether will be the suitable solvent