You can separate sugar and sand by using a process called filtration. When mixed with water, the sugar will dissolve while the sand will not. By pouring the mixture through a filter, the sugar solution will pass through, leaving the sand behind. The sugar can then be separated from the water by evaporating the water.
Put them in water. Sugar dissolves, sand remains Filter the solution to separate sand and salt. Evaporate solution with dissolved salt to get salt back
l,
To extinguish a magnesium fire, you can use a Class D fire extinguisher specifically designed for metal fires. It is important to never use water on a magnesium fire, as it can react explosively with the metal. Sand or a dry powder extinguishing agent can also be used to smother the fire and deprive it of oxygen.
Most likely an extinguisher that uses sand or foam to choke the oxygen out of the flame because this type of fire is hard to put out with water or other means.
Starves it of oxygen
You can separate sugar and sand by using a process called filtration. When mixed with water, the sugar will dissolve while the sand will not. By pouring the mixture through a filter, the sugar solution will pass through, leaving the sand behind. The sugar can then be separated from the water by evaporating the water.
Put them in water. Sugar dissolves, sand remains Filter the solution to separate sand and salt. Evaporate solution with dissolved salt to get salt back
because it takes away the oxygen which fuels a fire.
Use water. Mix it around, the sugar will dissolve into the water. Use a siv to separate the water and the sand, put the water in a container and wait for the water to evaporate: leaving sugar and sand.
Because water is better to use to put out fires than sand.
Water would take longer because it is a liquid. Sand would put it out faster
The best way is to use sand or water.
l,
switch off the main switch and use sand to put off the fire
Sand is used to put out fires because it is a non-combustible material that deprives the fire of oxygen, preventing it from spreading. When sand is poured over a fire, it helps to smother the flames by creating a barrier between the burning material and the air. Additionally, sand can absorb heat and help to cool down the fuel source, aiding in extinguishing the fire.
Sand helps to smother a fire by cutting off the oxygen supply needed for combustion. When sand is poured onto a fire, it creates a barrier between the fuel and oxygen in the air, causing the fire to suffocate and eventually go out.