No, the electrical insulation rating of a 15 amp duplex receptacle is only rated at 130 volts. The 15 amp 240 volt receptacle is rated at 250 volts. The 240 volt receptacle also has a tandem pin configuration instead of the parallel configuration of the 120 volt device. The different pin configuration is so that a 120 volt electrical device can not be plugged into a 240 voltage receptacle.
The configuration of tin refers to its electronic configuration, which is [Kr] 4d^10 5s^2 5p^2. This indicates the distribution of electrons in the energy levels of tin atoms.
Pin 1 is for ground, Pin 2 is for positive audio signal, and Pin 3 is for negative audio signal.
In North America the neutral pin is used to complete the circuit. One pin is "hot", one pin is neutral and the last pin is ground.
There are 2 pints in a pin.
i think it secures our data from outside accessors
You can just Google the IC number and check the datasheet. This is very useful for getting the pin configuration of other IC as well. Anyway 7486 is a 14pins, 4 independence gates of XOR Gate Input Output #1 Pin1 Pin2 PIN3 #2 Pin4 Pin5 PIN6 #3 Pin10Pin9 Pin8 #4 Pin13Pin12 Pin11 Others Vcc Pin 14 Gnd Pin 7 Hope that helps.
The pin configuration of sl 100 is B C E with ground as the base of the transistor.
the pin configuration of a processor means that the diagramatic representation of block diagram of processor representing various pins and the function of that pins
What is ift why we go for it.what are its applications
7468
WHAT IS THE PINS CONFIGURATION OF 8086?
A: There is definitely a pin difference in configuration for each family of gates up to a point because of variety of gates available.
one will be ground the other 3 will be steps when each is powered indiviually
tsryeythd utr6rfgea 76ikgvifrykwt
The pin configuration of the 240 volt receptacle is different from a 120 volt pin configuration. This is a safety factor to prevent the wrong voltage being applied to the wrong devices.
The pin configuration of the 240 volt receptacle is different from a 120 volt pin configuration. This is a safety factor to prevent the wrong voltage being applied to the wrong devices.