1 meter cubed is equal to 1,000,000 millimeters cubed. This is because there are 1,000 millimeters in one meter, and volume is calculated by cubing the linear unit. Therefore, 1 meter cubed is equivalent to (1,000)^3 = 1,000,000 millimeters cubed.
1 cm3 = 1 millionth (1x10-6) m3 There are 100 centimeters in a meter. So a cubic meter is 100 times longer, 100 times wider and 100 times deeper than a cubic centimeter. Thus, there are 100x100x100 = 1,000,000 (1 million) cubic centimeters in a cubic meter.
Kilograms and meters are units of different physical quantities and cannot be directly converted. Kilograms measure mass, whereas meters measure length.
Automobile oils weigh between 54.931335 and 58.676654 pounds per cubic foot. Converted to the metric system, it weighs between 880 and 940 kilograms per cubic meter.
The weight of 1 cubic meter of sand can range from 1,400 to 1,600 kilograms, while the weight of 1 cubic meter of silt can range from 1,800 to 2,200 kilograms. The weight can vary depending on factors such as moisture content and mineral composition.
62.4 pounds per feet cubed converts to about 1000kg per meter cubed.
1 cubic meter of water weighs 1 tonne = 1000 kilograms.
Kilograms per square meter x 0.001422 equals pounds per square inch.
These two measurement types can not be converted to equivalent measurements. The kilogram is a unit of mass, and the meter is a unit of length in the metric system. You can convert kilograms to pounds or miles to meters.
This depends on the density of the rock. Density is measured in terms of kilograms per meter cubed, so if you know the density, then you have your answer.
...probably about 2100 cubic meters, I suppose. In exactly the same way, 15.75 kilograms is 15.75 kilograms, and 2 pounds is 2 pounds. :)
When it's on or near the surface of the Earth, it weighs 3,922.8 newtons (881.85 pounds). In other places, it weighs some different amount.
Two common units for density are grams per cubic centimeter (g/cm³) and kilograms per liter (kg/L).
To convert 110 kilograms per cubic meter to pounds per cubic inch, you'd first convert kilograms to pounds (1 kilogram is approximately 2.20462 pounds) and meters to inches (1 meter is approximately 39.3701 inches), then divide by the cubic conversion factor (1 cubic meter is approximately 61,023.7 cubic inches). So, 110 kilograms per cubic meter is roughly 0.00006307 pounds per cubic inch.
1 meter cubed is equal to 1,000,000 millimeters cubed. This is because there are 1,000 millimeters in one meter, and volume is calculated by cubing the linear unit. Therefore, 1 meter cubed is equivalent to (1,000)^3 = 1,000,000 millimeters cubed.
The density of Butyl Chloride varies depending on its form. Tert-Butyl chloride has a density of 840 kilograms per cubed meter, while 1-Chlorobutane has a density of 890 kilograms per cubed meter.
This is a nonsense question. Millimeters are a unit of length and the centimeter cubed is a unit of volume. It is like asking how many kilograms are there in a mile. If however you mean, how many millimeter cubed are there in a centimeter cubed then the answer is 1000 10 x 10 x10