0
What happens if you put metal in a kettle if it both does and does not touch the metal filament at the bottom of an electric kettle?
Wiki User
∙ 12y ago
A rainbow shoots out of the spout and the kettle takes the form of a unicorn!
Wiki User
∙ 12y ago
If the metal does not touch the filament, it should be safe to use in an electric kettle without causing any damage. However, if the metal comes into contact with the filament, it can create a short circuit, potentially causing damage to the kettle or even a safety hazard like an electric shock or a fire. It's best to avoid putting any metal objects in an electric kettle to prevent any risks.
Add your answer:
Earn +20 pts
In an electric kettle water becomes hot by?
In an electric kettle, water becomes hot by using a heating element that heats up when the kettle is turned on. The heating element transfers heat to the water, raising its temperature until it reaches boiling point.
Will an electric kettle catch fire if it is allowed to boil dry?
Yes, an electric kettle can catch fire if it is allowed to boil dry. When there is no water in the kettle to absorb the heat produced by the heating element, the kettle can overheat and potentially ignite the surrounding materials. It is important to always ensure there is an adequate amount of water in the kettle when it is being used.
Which chemical is used to remove scales in an electric kettle?
VINEGAR
Electrical appliance that starts with e?
espresso machine
How does all of a kettle of water boil when it is heated from the bottom?
When the kettle is heated from the bottom, convection currents are created in the water. Hot water near the bottom rises while cooler water moves downwards to replace it. This process allows for heat to be distributed throughout the entire kettle, causing all the water to eventually reach its boiling point.
How does an electric kettle heat up water?
An electric kettle heats up water by using an electric heating element located at the bottom of the kettle. When the kettle is plugged in and turned on, the electric current passes through the heating element, generating heat. This heat transfers to the water, causing it to heat up and eventually boil.
Why is the heating element in an electric kettle positioned very close to the bottom of the kettle?
The heating element is positioned close to the bottom of the electric kettle to ensure efficient transfer of heat to the water. Placing it near the bottom helps heat the water evenly and quickly, leading to faster boiling times. Additionally, it helps prevent damage to the kettle by keeping the element submerged in water at all times.
What happens if the electric kettle left on?
Leaving an electric kettle on for an extended period can pose a fire hazard due to overheating. It may damage the kettle and increase your electricity bill. Always remember to unplug the kettle when not in use to avoid any potential accidents.
Why is the element at the bottom in a electric kettle?
It is not an element... for hard water usually a build up calcium compounds.
How does a kettle filament heat all the water?
The filament or element gets hot and passes it's heat into the water.
Which part of the electric kettle is the earth wire connected?
the metal casing of the electric kettle
In an electric kettle water becomes hot by?
In an electric kettle, water becomes hot by using a heating element that heats up when the kettle is turned on. The heating element transfers heat to the water, raising its temperature until it reaches boiling point.
Who made the first electric kettle made?
Arthur Leslie Large invented the first electric kettle.
What energy does an electric kettle have?
The energy which powers a kettle ultimately comes from the Sun. While a kettle is powered by electrical energy if it is an electric kettle or gas if it is whistling kettle, the energy ultimately comes from the Sun and came to Earth as sunlight.
When an electric kettle is switched on it will take a few minutes to heat the water how does the element at the bottom of the kettle heat all of the water?
As water at the bottom is heated, it rises and cold water replaces it. That's heated and the cycle continues until all the water is at the same temperature.
How is all of the water in a kettle can be the same temperature even if the kettle is heated only from the bottom?
the kettle is made from iron. Matter passes through and that's why the water is the same temperature as the bottom of the kettle.
How is all of the water in a tea kettle can be the same temperature even if the kettle is heated only from the bottom?
the kettle is made from iron. Matter passes through and that's why the water is the same temperature as the bottom of the kettle.
