Code 27 on a 1994 Plymouth Voyager typically refers to an issue with the injector control circuit. This could be due to a faulty fuel injector, wiring problem, or engine control module issue. It is recommended to inspect the injector, related wiring, and connections to diagnose and resolve the problem.
There has never been a man made object to leave the Solar System. There are however, two objects which may escape the influence of Sol and enter the interstellar medium. These objects are the Voyager 1 and Voyager 2 spacecraft. It is currently unknown which will leave the system first, as although Voyager 1 was launched first, peculiarities of the nature of the Solar System may mean that Voyager 2 breaks the heliosphere first.
Yes, medical code 088.81 is specifically for Lyme disease. This code indicates a diagnosis of Lyme disease by a healthcare provider.
The furthest space drone in space is Voyager 1, launched by NASA in 1977. As of 2021, Voyager 1 has traveled over 14 billion miles from Earth and continues to send valuable data back to Earth from the edge of the solar system.
Pandora is a fictional planet featured in the movie "Avatar." It is not a real place, so it does not have a physical location or distance.
No vacuum change at the MAP sensor.
Trouble code P1698 means: No CCD Messages Received From The TCM
Trouble code P1698 means: No CCD Messages Received From The TCM
Trouble code p1784 means: Pressure switch circuit: LR
Trouble code P1698 means: No CCD Messages Received From The TCM
Loss of Camshaft or Crankshaft sensor read at the PCM.
Solnoid switch valve stuck in L/R position
I assume you have an electronic controled transmission. OBD II Code: P0755-----Shift Solenoid "B" Malfunction. Jim
P0300 = random misfire. Could be as simple as needing a tune up.
MIL Code 11 = No crank reference signal detected during engine cranking. Good luck!
Per code manual P0700 is Trans control system malfunction. You need to have the transmission computer checked for codes.
CODE 23** Indicates that the air temp sensor input is below the minimum acceptable voltage or sensor input is above the acceptable voltage.