5
When you flip the switch, it completes the electrical circuit and allows current to flow instantly through the wires to reach the light bulb, causing it to light up. The speed of electricity traveling through wires is almost instantaneous, so the light bulb lights up immediately after the switch is turned on, regardless of the distance from the switch to the bulb.
(Assuming you're asking about a light bulb.) No (By the way, you should specify what kind of bulb, and you need an indefinate article, such as "a" or "an" before your noun (which in this case is bulb) in this sentence.)
The conducting link between the cell and the bulb in a torch is the wires inside the circuit. When the switch is turned on, the circuit is completed, allowing the electrical current to flow from the cell through the wires and to the bulb, causing it to light up.
If someone only connect one of the wires to the bulb holder, the circuit will be open and the lamp will not light. This is the same principal that a switch in the circuit does. It opens and closes the circuit.
The wires in the middle of a light bulb are called the filament. The filament is typically made of tungsten and it heats up when electricity passes through it, emitting light as a result.
The tiny wires in a light bulb are called filament wires. They are made of tungsten and are responsible for emitting light when an electric current passes through them.
by shorter wires or thiker wires
Make a circuit with 2 wires a batery and a light bulb and touch wire to medle on light bulb
You can create a simple circuit with a battery, a light bulb, and wires. Connect the wires to the battery and light bulb, then touch the ends of the wires to the object in question. If the light bulb lights up, the object is a conductor as it allows the flow of electricity. If the light bulb does not light up, the object is an insulator as it does not allow the flow of electricity.
No. Or at least not perceptually. The wires only supply electricity to the bulb - the bulb is what limits the current.
Lead wires in a light bulb are used to connect the filament to the electrical circuit. They conduct electricity from the power source to the filament, allowing it to heat up and produce light. Lead wires also provide support for the filament within the bulb.
Perhaps by unscrewing the bulb light.
As the name implies, support wires support the filament wire in the bulb, The filament, of course is the wire that glows white hot, giving out light
As the name implies, support wires support the filament wire in the bulb, The filament, of course is the wire that glows white hot, giving out light
u need a battery 2 wires and a light bulb. Step 1. Get the 2 wires and connect them to the battery step 2. connect the other side at the bottom of the light bulb the light bulb should light if it doesn't :(
u need a battery 2 wires and a light bulb. Step 1. Get the 2 wires and connect them to the battery step 2. connect the other side at the bottom of the light bulb the light bulb should light if it doesn't :(