0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Which process used for cooled water in cooling tower?
The process used for cooling water in a cooling tower is evaporation. Hot water is distributed over the fill material in the tower, allowing it to come into contact with air. As the water passes through the fill, some of it evaporates, taking away heat and cooling the remaining water before it is collected and circulated back into the system for cooling.
What is the use of chemical bypass pot feeder?
A bypass pot feeder is used to add a chemical (liquid or solid) to the suction side of a process pump. This is most commonly used with cooling water that is circulated from a cooling water tower to a heat load. Injecting chemicals can be used to control pH or various bacteria, etc.
How did devils tower form?
Devils Tower formed from an ancient volcanic intrusion that cooled and solidified underground. Overlying sedimentary rocks have eroded away, exposing the tower-shaped rock formation we see today. The unique columnar structure of Devils Tower is a result of how the magma contracted as it cooled, creating vertical cracks and columns.
When the temperature and humidity of air is low you usually use which cooling tower?
natural
What happens if a blower on a cooling tower breaks down on a hot day?
If a blower on a cooling tower breaks down on a hot day, the cooling tower may not be able to dissipate heat effectively, causing the cooling system to overheat. This can lead to equipment damage, reduced efficiency, and potentially system shutdown to prevent further damage. Immediate repairs or temporary solutions like using backup blowers are necessary to prevent overheating.
Which process used for cooled water in cooling tower?
The process used for cooling water in a cooling tower is evaporation. Hot water is distributed over the fill material in the tower, allowing it to come into contact with air. As the water passes through the fill, some of it evaporates, taking away heat and cooling the remaining water before it is collected and circulated back into the system for cooling.
How does a cooling tower work?
A cooling tower works by using the process of evaporation to remove heat from a system. Hot water from a heat exchanger is pumped to the top of the tower where it is distributed over the packing material. As the water flows down through the packing, some of it evaporates, which removes heat and cools the remaining water. The cooled water is then recirculated back to the heat exchanger to continue the cooling process.
What is wet cooling?
The only thing that I've heard of with "wet cooling" in, is a wet cooling tower. A Wet Cooling tower for the closed-circuit cooling of water where the water to be cooled comes into direct contact with the cooling air dissipating heat by evaporation and air heating. The air draught required for cooling can be induced by fans or by the natural effect of the stack of the cooling tower building (natural draught cooling tower).So I don't know if that answers your question or not, but i hope it helps...
Where we can install the cooling tower And There is a company in which cooling tower is installed?
The Cooling tower is installed where the continuous heat rejection is required. Like process plants. Type is depends up on use & water property.
A system that cools the air by spraying water into a tower is called?
The system you are referring to is known as an evaporative cooling tower. It works by using the latent heat of vaporization to cool the air as water is sprayed into the tower and evaporates, absorbing heat in the process.
How cooling tower height is significant for cooling tower design?
There's quite multitude of things that impact a cooling performance. Specifically the height of the tower impacts on the the drafting air through the tower. See "Air Cooled Heat Exchangers and Cooling Towers" by Kroger for something more indepth.
What is approach of a cooling tower?
Cooling towers are a very important part of many chemical plants. The primary task of a cooling tower is to reject heat into the atmosphere. They represent a relatively inexpensive and dependable means of removing low-grade heat fromcooling water. The make-up water source is used to replenish water lost to evaporation. Hot water fromheat exchangers is sent to the cooling tower. The water exits the cooling tower and is sent back to the exchangers or to other units for further cooling. Cooled water is needed for, for example, air conditioners, manufacturing processes or power generation. A cooling tower is an equipment usedto reduce the temperature of a water stream by extracting heat from water and emitting it tothe atmosphere. Cooling towers make use of evaporation whereby some of the water is evaporated into a moving air stream and subsequently discharged into the atmosphere. As a result, the remainder of the water is cooled down significantly (Figure 1). Cooling towers are able to lower the water temperatures more than devices that use only air to reject heat, like the radiator in a car, and are therefore more cost-effective and energy efficient.
What is range in cooling tower?
Range is the difference of cooling water inlet and cooling water outlet temp
What happens to the primary cooling water in a pressurized water-reactor?
In a pressurized water-reactor, the primary cooling water circulates through the reactor core to remove heat generated by the nuclear fission process. This heated water then transfers its heat to a secondary water loop through a heat exchanger, where the secondary water is converted to steam to drive a turbine and generate electricity. The primary cooling water is then cooled down in a separate heat exchanger before being recirculated back into the reactor core.
How does an air cooled chiller work?
An air cooled chiller works by using fans to draw ambient air through the chiller coils to remove heat from the refrigerant. The heat is then expelled into the atmosphere, allowing the refrigerant to return to a cool state and continue the cooling cycle. Air cooled chillers are commonly used in smaller applications where water availability or space for a cooling tower is limited.
Where you use cooling tower water?
power plant
How much water does a BAC cooling tower hold?
7
