0
Should you lower the stage before switching from medium to high power?
Wiki User
∙ 7y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
When light passes from a medium with a high index of refraction into a medium with a lower index of refraction which direction does the light bend?
A medium with a higher index of refraction, like diamond, is more dense than the medium with a lower index of refraction, like air. If the ray of light is moving from the less dense medium (lower index of refraction), to a more dense (higher index of refraction) the ray of light bends TOWARDS the normal.
What does low power objective len do?
The low power objective lens on a microscope typically provides a magnification of around 10x. This lens is used for initial focusing and locating objects on a slide at a lower magnification before switching to a higher magnification lens. It offers a wider field of view compared to higher magnification lenses.
What is the value of the index of refraction of a medium means?
Refractive index value of a medium - when it is higher then the speed of light in that medium would become lower. In case of water it travels faster compared to that in glass. In case of diamond the speed is further reduced. Since the refractive index is inversely related to the speed of light in the medium.
What is the definition of low earth orbit?
An earth orbit that is lower to earth then both a medium and high earth orbit.
When setting Up the Miscroscope What Power Objective Do you turn On first?
When setting up a microscope, you typically start with the lowest power objective lens first, such as the 4x objective lens. This lens allows you to find and focus on the specimen at a lower magnification before switching to higher power objectives for more detailed viewing.
What is the function of medium power scanning objective in a microscope?
The medium power scanning objective in a microscope typically has a magnification of around 20x to 40x. It is used to locate and focus on the specimen at a lower magnification before switching to higher magnification objectives for detailed observation.
What power must be in first place a slide on a microscope stage?
The lowest power objective lens should be in place when placing a slide on a microscope stage. This allows for easier focusing and initial viewing of the specimen at a lower magnification before switching to higher magnifications.
What are the Advantages of multilevel inverters over pw inverters?
Advantages of Multilevel Inverter:The multilevel converter has a several advantages, that is:1. Common Mode Voltage:The multilevel inverters produce common mode voltage, reducing the stress of the motor and don't damage the motor.2. Input Current:Multilevel inverters can draw input current with low distortion3. Switching Frequency:The multilevel inverter can operate at both fundamental switching frequencies that are higher switching frequency and lower switching frequency. It should be noted that the lower switching frequency means lower switching loss and higher efficiency is achieved.4. Reduced harmonic distortion:Selective harmonic elimination technique along with the multi level topology results the total harmonic distortion becomes low in the output waveform without using any filter circuit.
What are the advantages of multilevel inverters over pwm inverters?
Advantages of Multilevel Inverter:The multilevel converter has a several advantages, that is:1. Common Mode Voltage: The multilevel inverters produce common mode voltage, reducing the stress of the motor and don't damage the motor.2. Input Current: Multilevel inverters can draw input current with low distortion3. Switching Frequency: The multilevel inverter can operate at both fundamental switching frequencies that are higher switching frequency and lower switching frequency. It should be noted that the lower switching frequency means lower switching loss and higher efficiency is achieved.4. Reduced harmonic distortion: Selective harmonic elimination technique along with the multi level topology results the total harmonic distortion becomes low in the output waveform without using any filter circuit.
Engine spits and splutters when in a pull?
It's stalling out. Try switching to a lower gear.
Is cut through switching faster than store and forward method?
Yes, cut-through switching is generally faster than store-and-forward switching because it forwards data as soon as the destination address is read instead of waiting for the entire frame to be received and checked for errors before forwarding. This results in lower latency but might be less reliable if errors occur during transmission.
Why must the specimen be centered before switching to high power on a microscope?
Centering the specimen before switching to high power on a microscope helps ensure that the area you want to observe is in focus and at the center of the field of view. This is important because high power magnification has a narrower field of view and lower depth of field, making it more challenging to locate and focus on the specimen if it is not first centered.
When light passes from a medium with a high index of refraction into a medium with a lower index of refraction which direction does the light bend?
A medium with a higher index of refraction, like diamond, is more dense than the medium with a lower index of refraction, like air. If the ray of light is moving from the less dense medium (lower index of refraction), to a more dense (higher index of refraction) the ray of light bends TOWARDS the normal.
Would switching to dish network lower your cable bill?
Switching to dish network could lower your bill, however it could also lead to a loss of quality service depending on the dish quality in your area. If you are looking to lower your bill, most provider service representatives are empowered to provide counteroffers if they think a customer will leave them; it might be possible to bargain with your current provider if they could be convinced you were dedicated to switching providers purely for financial reasons.
Why cmos is used more than other transistor?
Lower power dissipation (except at very very high switching rates, as almost all the power dissipated by CMOS is during switching).
Is there a promotion when switching military branches?
No there is not a promotion, but there is also no demotion. Ibzm That's not entirely true. If you are switching from branch to branch depending on the job you can be demoted to the lower ranks. If you are not deemed to be qualified enough at that job that you are switching into for your new branch of service then they will drop you down in ranks.
How are infrared and visible photons different from one another?
IR: longer wavelength, lower frequency, lower energy per photon.Visible: medium wavelength, medium frequency, medium energy per photon.UV: shorter wavelength, higher frequency, higher energy per photon.
