Seawater is a solution. To separate a solid from a solution, u can use crystallisation. Evaporation would cause impurities to form. Crystallisation can be done by heating the seawater till a saturated solution is formed. Crystals form on the glass rod when the solution is saturated. After the solution is heated till saturation, filter the crystals and dry them in peices of filter paper. The crystals obtained is sodium chloride (salt).
Wiki User
∙ 12y agoTo separate salt from water in a salt solution, you can use the process of evaporation. Heat the solution until all the water evaporates, leaving behind the salt. This works because salt has a much higher boiling point than water, so the water will evaporate first, leaving the salt behind.
Wiki User
∙ 15y agoThe fastest mechanical method to separate salt from water is to boil off all of the water. If you are collecting the salt, it will be left on the bottom of the original container. If you are collecting the purified water, you will need to capture and condense the water vapor.
Wiki User
∙ 13y agoBoil the solution until the water evaporates, leaving the salt.
:))
Wiki User
∙ 9y agoPlace both in a fine mesh sieve and the liquid will pass through the mesh, leaving the solid behind.
Wiki User
∙ 11y agodesalinization
Wiki User
∙ 14y agoevaporation
If the solution only consists of dissolved salt and water, the answer is simple, just use evaportation, water goes, salt stays.
A possible hypothesis could be: "If salt is mixed with water and the solution is frozen, then the salt will not separate from the water, as both salt and water will freeze together into a solid."
Put them in water. Sugar dissolves, sand remains Filter the solution to separate sand and salt. Evaporate solution with dissolved salt to get salt back
Salt water is a solution (when one substance is evenly mixed into another liquid [usually water] e.g. sugar water), and to separate a solution is a pot or bowl and a fire or stove. Simply boil the water, wait for it to evaporate and you have salt.
To separate salt from chalk, you can dissolve the mixture in water. Salt is soluble in water while chalk is not. After dissolving, you can filter the mixture to separate the insoluble chalk from the salt solution. By evaporating the water from the salt solution, you can obtain the salt crystals.
Yes
Boiling off the water from a salt solution will separate the solid salt and water (which can be collected by a condenser).
Boil away the water and the salt will be left.
No, it cannot separate salt from a salt solution. This is because salt is soluble in water.
You boil the salt water so the water evaporates, leaving salt.
Destiling or reverse osmosis.
You can use evaporation to separate salt from a solution of salt and water.
rice from solution by filteration and salt by vaporising water .
Boil the water off. It leaves the salt behind.
If the solution only consists of dissolved salt and water, the answer is simple, just use evaportation, water goes, salt stays.
Yes, a mixture of salt and water can form a solution. When salt is dissolved in water, the salt particles separate and disperse evenly throughout the water, creating a homogenous mixture. This mixture is called a saltwater solution.
A possible hypothesis could be: "If salt is mixed with water and the solution is frozen, then the salt will not separate from the water, as both salt and water will freeze together into a solid."