0
Is this true The function of control rods in a nuclear reactor is to speed up the nuclear reactions?
Wiki User
∙ 14y ago
No, the function of the control rods is to absorb surplus neutrons so that the chain reaction proceeds at a steady rate, and to compensate for the reducing reactivity of the reactor as the fuel is burned up over the refuelling cycle. They also have a very important safety function in shutting down the reactor fully when required, by inserting them fully, thus preventing any chain reaction from starting.
Wiki User
∙ 14y ago
No, this statement is not true. The function of control rods in a nuclear reactor is to control or regulate the rate of nuclear reactions by absorbing neutrons and adjusting the reactor's power output. They are used to maintain the reactor at a safe and stable level of operation.
Add your answer:
Earn +20 pts
The rate at which reactions occur in a nuclear reactor is regulated by?
The rate of reactions in a nuclear reactor is regulated by control rods made of materials like boron or cadmium, which absorb neutrons and help control the nuclear fission process. By adjusting the position of these control rods, operators can control the rate of reactions and the amount of heat produced in the reactor.
What is the next step in a nuclear reactor after nuclear fission occurs in fuel rods?
After nuclear fission occurs in fuel rods in a nuclear reactor, the next step is to control the reaction by regulating the rate of fission through control rods. These control rods absorb neutrons to maintain a steady and safe level of nuclear chain reactions in the reactor core.
How many control rods are there in a nuclear reactor?
The number of control rods in a nuclear reactor can vary depending on the design and size of the reactor. Typically, a nuclear reactor can have anywhere from 50 to 100 control rods. These rods are used to control the rate of the nuclear reaction by absorbing neutrons and regulating the power output of the reactor.
In a nuclear power plant fission reactions are controlled by inserting what?
In a fission reactor, control is implemented by inserting control rods into the reactor. These are made of a material that absorbs neutrons, and prevents a reaction from taking place.
What is the place where controlled nuclear fission reactions take place?
The place where controlled nuclear fission reactions take place is called a nuclear reactor. In a nuclear reactor, uranium atoms are split in a controlled manner to produce heat energy, which is used to generate electricity.
The rate at which reactions occur in a nuclear reactor is regulated by?
The rate of reactions in a nuclear reactor is regulated by control rods made of materials like boron or cadmium, which absorb neutrons and help control the nuclear fission process. By adjusting the position of these control rods, operators can control the rate of reactions and the amount of heat produced in the reactor.
What is the function of reflector and reactor core?
The reflector in a nuclear reactor helps to reflect neutrons back into the reactor core, increasing the chances of nuclear reactions occurring. The reactor core is where the nuclear reactions take place, generating heat that is used to produce electricity.
What is the difference between the nuclear reactions in a nuclear reactor and those in an atomic bomb?
Nuclear reactions in a nuclear reactor are controlled reactions. The reactions in the atomic bomb are not controlled reactions
In a nuclear reactor lowering control rods willresult in?
Lowering control rods in a nuclear reactor will result in the absorption of more neutrons, which decreases the rate of fission reactions and slows down the nuclear chain reaction. This helps to control and regulate the power output of the reactor.
What In a nuclear reactor lowering control rods will result in .?
Lowering control rods into a nuclear reactor will absorb neutrons, reducing the rate of fission reactions and therefore decreasing the reactor's power output. This is a common method used to control and regulate the reactor's power level.
What is the purpose of the reactor vessel?
The reactor vessel is the main container that houses the nuclear fuel, control rods, and coolant in a nuclear reactor. Its purpose is to contain and shield the nuclear reactions happening inside, and to provide structural support and safety for the reactor core.
What does lower control rods result in?
Lowering control rods into a nuclear reactor results in reducing the number of nuclear fission reactions occurring in the reactor core. This process helps to regulate the power output of the reactor by absorbing neutrons and decreasing the rate of nuclear reactions.
In a nuclear reactor lowering control rods will result in?
Lowering control rods in a nuclear reactor will result in the absorption of neutrons, which decreases the rate of fission reactions happening in the reactor core. This leads to a decrease in heat production and ultimately reduces the power output of the reactor.
What is the function of moderator and control rods in fission reactors?
The moderator slows down neutrons to enhance the likelihood of fission reactions. Control rods absorb neutrons to regulate the rate of the fission chain reaction in the reactor core. Together, they help maintain safe and controlled nuclear reactions in a fission reactor.
How is the controlled release of nuclear energy in a reactor is accomplished by?
Controlled release of nuclear energy in a reactor is achieved by controlling the rate of nuclear fission reactions through the use of control rods. These control rods absorb neutrons, limiting the number available to initiate fission reactions. By adjusting the position of the control rods, the reactor's power output can be regulated to maintain safe and efficient operation.
Which component within a nuclear reactor directs neutron bombardment?
The control rods within a nuclear reactor help direct neutron bombardment. By adjusting the position of the control rods, operators can regulate the rate of nuclear fission reactions and control the release of energy.
What is the function of a nuclear fuel in nuclear reactor?
The function of nuclear fuel in a nuclear reactor is to undergo controlled fission reactions, releasing energy in the form of heat. This heat is used to generate steam, which drives turbines to produce electricity. The fuel typically used is uranium or plutonium.
