0
Add your answer:
Earn +20 pts
What is the most expensive hammer?
The most expensive hammer is the Vaughan Stealth Solid Steel Hammer, which is priced at around $200. It is known for its durability and high-quality construction.
When a hammer break s a large rock into smaller pieces the broken rock is on example of what kind of change?
phyiscal change
What is speed of sound traveling through a solid?
if you have concreat drivway then you can do it. you lay on the ground and put your ear to the ground. get another person 100 ft away with the hammer. if he taps it and you can hear it first through the concreat. have fun!
How to break rock in different ways?
Using a hammer and chisel: Place the chisel on the rock where you want to break it and strike it with the hammer until it breaks. Using a sledgehammer: Strike the rock with the sledgehammer with enough force to break it. Using expansion agents: Drill holes into the rock, fill the holes with expansion agents, and wait for the rock to break apart as the agents expand.
Which tool is commonly used to test for the hardness if a mineral?
hammer
What is the most expensive hammer?
The most expensive hammer is the Vaughan Stealth Solid Steel Hammer, which is priced at around $200. It is known for its durability and high-quality construction.
What can cause a physical change in solid piece of sodium metal?
Hitting with a hammer
Is a nail a solid?
A nail made of liquid or gas would not be very effective. The hammer would go right through it. So, nails have to be solid.
What would happen if you hit iodine with a hammer?
If you were to hit iodine with a hammer, it would most likely shatter into small pieces or powder. Iodine is a brittle solid, and its crystal structure would break upon impact from the hammer.
What would happen to the three forms of water if you hit them with a hammer?
If you hit solid ice with a hammer, it may shatter into smaller pieces. Liquid water would disperse under the force of the impact. Steam, as a gas, would not be affected by a hammer.
What block of wood does the hammer rests on?
The hammer rests on a wooden block called a "buck." It is typically made of hard wood like oak or hickory to provide a solid surface for hammering.
When a hammer break s a large rock into smaller pieces the broken rock is on example of what kind of change?
phyiscal change
How do you remove rear Break Roters Ford Expidition?
You have to cut the rotor from the outside towards the center as far as you can then use a cold chisel and hammer to crack the rest. It will come right off. They rust on. I cut them after a solid hour with a sledge hammer.
What are the types of hammer?
Claw Hammer Sledge hammer Ball peen hammer Framing Hammer Mallet hammer Framing Hammer Upholstery hammer Geologist's hammer
What sound does a hammer make?
Ding Ding Ding
What is the tool for beating nail?
hammer
What is speed of sound traveling through a solid?
if you have concreat drivway then you can do it. you lay on the ground and put your ear to the ground. get another person 100 ft away with the hammer. if he taps it and you can hear it first through the concreat. have fun!
