Wiki User
∙ 11y agoWant this question answered?
Be notified when an answer is posted
Wire carrying negative and positive charges in a closed circuit. It doesnt have earth.
Binary
Two stars orbiting each other are "binary stars" ...a group of stars near each other, may be formally or informally known as a "cluster".
c) mitosis and binary fission
The binary name for KBr is Potassium Bromide.
the functons of encoder is reverse of the dec
If you are talking combinations, without binary number representations, then you are talking about a circuit that has a 1 output when any input is a 0. That is a 3 input NAND gate. If you are talking binary number representation, then you are talking about a circuit that has a 1 output when the inputs are 010, 001, or 000. Use a 3 to 8 decoder, with an OR gate on the low three outputs.
any body can help on this ?
because binary system is the easy way to understand the inputs and outputs. and it has inly two values 1 or 0;
It's a device that samples an analog signal and outputs an equivalent binary value
From wikipedia: A half adder is a logical circuit that performs an addition operation on two binary digits. The half adder produces a sum and a carry value which are both binary digits. A full adder is a logical circuit that performs an addition operation on three binary digits. The full adder produces a sum and carry value, which are both binary digits. It can be combined with other full adders or work on its own.
An encoder is a combinational circuit that converts a signal on exactly one input into its corresponding binary number.The maximum number of inputs is directly related to the number of outputs. Anencoder with n outputs supports 2^n inputs. When n = 2, there are 2^2 = 4 inputsthat can be encoded. When n = 3, there are 2^3 = 8 inputs that can be encoded.
circuit of modulation PSK
1
Binary (Bipolar) Phase Shift Keying.
Bit means 'Binary Digit' In a Digital Circuit, the amount of 'bits' is usually the measure of binary digits which can logically be processed. 8 bits per byte.
first create truth table, inputs should be combination of 3 bits i.e 8 possible combination. the outputs are the square of each input. you need 6 bits for the outputs since the square of 7 is 49 which is binary notation 49 is (110001) hence 6 bits. same goes for the other inputs. when the table is complete. find the Boolean function that drives each bit, preferably by K-maps to minimize the logic. Then from the equations, simply draw the circuit by using the necessary logic gates. There will be 3 inputs and 6 outputs for the overall circuit. Very easy but tedious. have fun