0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What has happened when a light bulb has burn out?
it simply means that a wire from the light bulb is joined or connected to the charged plates of the capacitor.resulting to discharged of the capacitor.
What the filament of bulb is broken then it is called?
If the filament of a bulb is broken, it is referred to as a "burnt out" or "blown" bulb. This means that the filament, which is the thin wire inside the bulb that produces light when electricity passes through it, is no longer connected and the bulb cannot function properly.
Where do you connect the blue wire on the tachometer for the bulb?
The blue wire on a tachometer is usually connected to the instrument panel lighting circuit. This allows the tachometer to light up when the vehicle's headlights are turned on. It is important to consult the tachometer's installation instructions for specific details on wiring connections.
Where is the positive wire on reverse light?
The positive wire for the reverse light is typically the one that carries power to the light bulb. It is usually connected to the switch that is activated when the vehicle is put into reverse gear. You can use a multimeter to test which wire is carrying power when the vehicle is in reverse.
How does a wire connect to a bulb?
A wire connects to a bulb by attaching one end of the wire to the metal base of the bulb and the other end to the metal contact on the bulb socket. When the circuit is complete, electricity flows through the wire and powers the bulb, causing it to light up.
Why the bulb is not lighting when one wire or terminal is not connected?
When one wire or terminal is not connected to a light bulb, it is not possible for electricity to complete the circuit. When a circuit is not completed, the bulb will not light. An off switch, for example, breaks the circuit.
How would a meter be connected in a circuit too measure the voltage at a light bulb?
When connecting a volt meter to a light bulb to measure the voltage of the light bulb, run a third wire from where the wire enters the bulb to one terminal of the voltmeter and a fourth wire from the other side of the bulb to the other terminal of the voltmeter.
How will a single burned-out bulb affect the strings of lights if each light is attached to its own wire?
If by "its own wire" you mean they are connected in parallel, then one bulb won't affect the others.
Why does a bulb in a circuit not work?
A light bulb is not lit when the swtich is not connected to the wire becasue there is no flow of electricity, specifically, flow of electrons. By disconnecting the wire, the bulb is no longer connected to the electricity source.
Describe the energy transformations that take place when a battery is connected to a light bulb in a series circuit?
The battery connected to the bulb has the potential chemical energy in it when it is connected by means of wire to the bulb the chemical energy in the battery is converted to the electrical energy which flows through the wire to the bulb glows the bulb which is a form of light energy after some time the bulb starts emitting heat which is heat energy.
What has happened when a light bulb has burn out?
it simply means that a wire from the light bulb is joined or connected to the charged plates of the capacitor.resulting to discharged of the capacitor.
How do you build a light bulb?
Picture hanging wire 1 strand connected to a 6 volt battery!
How can energy get to a light bulb?
Electricity flows through a wire connected to the light bulb, providing the energy needed to illuminate it. When the circuit is completed, electrons move through the wire and generate light and heat in the bulb through the process of electrical resistance.
Why do the terminals of the battery have to be connected to different poles of the light bulb for the circuit to complete in a safe manner?
The current flows from the positive terminal, along the wire, through the bulb and along the other wire back to the negative terminal.
What is the function of the live?
A 'live' or 'hot' wire is a wire that is connected to a power source. This wire supplies voltage to a load ( light bulb, hair dryer, etc.). When the load is also connected a neutral or another live wire this becomes a path for the flow of current (amps) known as a circuit.
How is energy transfered in a simple system?
In a simple system, such as a light bulb connected to a battery, energy is transferred through electrical currents. When the battery is connected to the light bulb, it provides the energy needed for the bulb to emit light. This energy transfer occurs as the electrons flow through the wire from the battery to the light bulb.
How lemon attratcts to currency?
Lemon contains citric acid which adapts to current. it flows like a wire and gets connected ton the bulb. therefore, the bulb lights up.
