0
Add your answer:
Earn +20 pts
11 oz water is how many cups?
There are 8 oz in 1 cup. So 11 oz would be equal to 1.37 cups (divide 8 into 11 = 1.37; rounded off it would be 1.4 cups)
How many atoms of tritium are in 3.75kg in water?
Vienna ocean mean water has 1.85 +/- 0.36 x 10^-11 pmm of tritium
Which substance would take more drops of antacid to neutralize a substance with a pH of 13 or a substance with a pH of 11?
It would take more drops of antacid to neutralize a substance with a pH of 13 compared to a substance with a pH of 11. This is because a substance with a pH of 13 is more basic and therefore requires more acidity to neutralize it.
How many cups are in 90 ounces of water?
There are 11.25 cups in 90 ounces of water. This can be calculated by dividing 90 by 8 (since 1 cup is 8 ounces).
What are the 11 steps in the water cycle?
Frankly there are NOT 11 steps in the water cycle, you could say that for the Global hydrological cycle but not a spicific places water cycle. The 4 stages are Evaporation, Condensation,Preticipation and collection
What are the release dates for Route 66 - 1960 Ten Drops of Water 1-6?
Route 66 - 1960 Ten Drops of Water 1-6 was released on: USA: 11 November 1960
1 million drops of water equals what volume?
Answer about 13 gallons depending on your assumptions of how many drops per gallon.Several methods to figure this out:1 million drops of water is 1666.667 fluid oz. There are 600 drops per fluid oz and 1,000,000 divided by 600 is 1666.667(last digit is rounded)1666.667 oz if about 13 U.S. gallons or if you prefer metric it is49.289 litersMethod 290840 Drops in 1 Gallon ( but that value depends on water temp and other factors)90840 Drops/1 gallon=1,000,000 drops/x gallons90840x=1,000,000x=11.0084 gallonsSo this method gives 11 gallons and if we want to know how many cubic inches that we note that:1 gallon of water is 231 cubic inches. So 11.0084x231=2542 cubic inches.______I found another professor give this example:http://jwilson.coe.uga.edu/emt668/EMAT6680.Folders/Howard/Million.Drops.of.Water/Million.Drops.of.Water.html10 drops of water = 1 milliliter and: 10,000 drops = 1 Liter then: 1,000,000 drops = 100 Liters and my reference quoted that: 1 Gallon = 3.5 Liters, so 1,000,000 drops of water = 28.5714 gallonsMethod 3The example above 10 drops per ml, and of course you can easily imagine that the size of a drop of water will not be uniform. It depends on temperature and the dropper and many other factors.Most people use 15-20 gtts( drops) per ml, usually 20.So the slightly larger value in this result comes from the fact that the drops are much bigger, 10 per ml instead of 20. Divide 28.574 by 2 and the you have 14.2 gallons. Also 1 US gallon = 3.78541178 liters so using 3.5 is a low estimate.So here is the same calculation as above using different assumptions. The example below uses 3.785 liters per gallon and 20 drops per ml.20 drops of water= 1 milliliter20,000 drops = 1 liter1 gallon is 3.785 liters.so(20,000 drops/1 liter)(3.785 liter/1 gallon)=75,700 drops/gallon(compare this to 90840 used in the first part above)75,700 drops/gallon=1,000,000 drops/X gallons.Solve for x75,700X=1,000,000and the answer is 100, 000 drops is 13.21 gallons
What are the release dates for Love Drops - 1910?
Love Drops - 1910 was released on: USA: 11 March 1910
How many moles of water are present in 180 grams of water?
11
How many 4 in 11?
HOW MANY LOTS OF 4 IN 11
What does 11 percent of hydrogen and 89 percent of oxygen make?
Water
How many meters make 11 feet?
11 feet is 3.35 meters.
What drops crystal staff in rogue galaxy?
kill monsters at ch#11
How many cups of water does each organ need?
11
How many gallons does 6 pounds 11 ounces make?
Approximately 3/4 US gallon. A US gallon of water weighs 8.35 pounds.
How many tens make 110?
Ggdhhffhcxghffjhff
If it takes 11 ounces of chemical in 10 gallons of water to make a finished dilution of 05 How many ounces of chemical would it take to make 100 gallons of finished dilution at 05?
To find out how many ounces of chemical it would take to make 100 gallons of finished dilution at 0.5%, we can set up a proportion. Since 11 ounces of chemical are used in 10 gallons of water, we can establish the ratio of ounces of chemical to gallons of water as 11:10. By setting up a proportion and solving for x, we find that it would take 110 ounces of chemical to make 100 gallons of finished dilution at 0.5%.
