The amount of amps required to start an engine varies depending on the size and type of the engine. As a general guide, small engines may require around 50-100 amps to start, while larger engines like those in trucks or heavy equipment may require several hundred amps. It's best to refer to the specific manufacturer's recommendations for the engine in question.
To determine the amperage required by a 12-volt audio radio, you would need to know the power consumption of the radio in watts. You can then use the formula: Amps = Watts / Volts to calculate the amperage.
A deep freezer can draw between 6 to 8 times its running amps on start-up, depending on the model and size of the freezer. For example, if a freezer runs at 6 amps, it could draw between 36 to 48 amps when starting up.
The amperage required to run a computer and monitor can vary depending on their power consumption. A typical desktop computer consumes around 3-6 amps, while a monitor can use around 1-2 amps. It's important to check the specifications of your specific devices to determine the exact amperage they require.
cca is 'cold cranking amps' in other words how many amperes can a given battery supply to crank a cold car engine. A good battery can give 400 amps for cold cranking.
The amps required for a device depend on its power consumption. You can calculate the amps by dividing the power rating (in watts) by the voltage (in volts) of the device. For example, a 1200 watt device plugged into a 120-volt outlet would require 10 amps (1200 watts / 120 volts = 10 amps).
usually around 600 amps, but it depends on the engine you have. For example, a larger engine will require more amps than a smaller engine. a typical 5.0 L V8 requires about 650 amps, and some SUVs have larger and smaller engines. So check your engine,and get the right battery.
150 Ltr.........
There isn't one set answer for this. It'll have to do with the displacement of the engine, the output of the starter required to get it to crank at enough speed to start, etc. Huge difference between, say, a 4.6 liter Land Rover V8 and a 12.0 liter Detroit Diesel 8V92 diesel V8.
7 pocket amps
That depends on several factors: If the car battery is FULLY discharged, a starter can pull as much as 200 AMPS when you try to start the engine, depending on the size of the engine. If the car battery is only "low", but still carries a pretty good charge, you might be able to get by with considerably less than 200 AMPS.
Almost any auto battery will start the engine if it is runnging good. But I would buy at least a 500cca battery.
amps equals watts divided by volts.
a battery should be reading 12 or 13 volts at full charge you would need it over 10 volts but its hypothetical as it depends on the engine size10 To add it's not the voltage that turns the starter motor it is the amount of what is called cranking amps or cold cranking amps cca which refers to the amount of amps when 32 degrees Fahrenheit or up. If you have below the specific amount of amps for your starter it will click, turn but very sold, or do nothing. A 12 volt battery typically needs 400+ amps to start the car. While 5 volts means your battery is dead having 12 volts does not mean your car will start.
3.9L / 5.2L engine - Denso Alternator Part No: 53008646 rated at 81 amps 3.9L / 5.2L / 5.9 L engine - Denso Alternator Part No:53008647 rated at 117 amps 3.9L / 5.2L / 5.9 L engine - Denso Alternator Part No:53008651 rated at 136 amps
A 15 amp circut will be fine.
It depends on the alternator.A diesel produces more amps because of the 24 volt system.14 amps on a 305....
The formula is volts times amps equals watts, or watts divided by volts equals amps.