1000 watts at 9.5AMPS in 120 volt = 4.7 AMPS in 240 volt ..........Divide that by 2 according to the choice of voltage... 500 watts (120V) + 4.7Amp
To calculate the amperage, use the formula: Amps = Watts / Volts. For a 250 watt deicer on a 120 volt circuit, the amperage drawn would be 2.08 amps.
In America, the standard voltage is 120 volts. To calculate the wattage used by a 3 amp device, you would multiply the amperage (3 amps) by the voltage (120 volts) which equals 360 watts.
Assuming the lights are using a standard power rating of 60 watts each, you would need approximately 1 amp for two 120 volt lights. This is calculated using the formula: Amps = Watts / Volts.
To convert amps to watts in a 12-volt application, you can use the formula: Watts = Volts x Amps. Therefore, in a 12-volt circuit, if you have 1 amp of current, the power consumption would be 12 watts (12V x 1A).
1000 watts at 9.5AMPS in 120 volt = 4.7 AMPS in 240 volt ..........Divide that by 2 according to the choice of voltage... 500 watts (120V) + 4.7Amp
To calculate the amperage, use the formula: Amps = Watts / Volts. For a 250 watt deicer on a 120 volt circuit, the amperage drawn would be 2.08 amps.
In America, the standard voltage is 120 volts. To calculate the wattage used by a 3 amp device, you would multiply the amperage (3 amps) by the voltage (120 volts) which equals 360 watts.
Assuming the lights are using a standard power rating of 60 watts each, you would need approximately 1 amp for two 120 volt lights. This is calculated using the formula: Amps = Watts / Volts.
To convert amps to watts in a 12-volt application, you can use the formula: Watts = Volts x Amps. Therefore, in a 12-volt circuit, if you have 1 amp of current, the power consumption would be 12 watts (12V x 1A).
Current (amps)=Watts/Volts =2000/120 =16.75 =16.75 amps
No. 20 amps at 120 volts will handle a maximum of 2400 watts. And you should never continuously load a 20 amp 120 volt circuit to no more than 1920 watts.
That depends on circuit voltage. 1 watt is equal to 1 volt times 1 amp.
If your generator is rated at 1000 watts continuous......and you are using 120V.....available amps are 1000/120 =8.3 .
A 1 HP motor running at 120 volts will draw approximately 746 watts. This calculation is based on the formula: Watts = Volts x Amps.
calculation for Watts is = volts X amps P=IE P= Power(WATTS) I = Current(AMPS) and E = Voltage(VOLTS). So: I = P/E and E = P/I therefore: 1 watt = 1 ampere x 1 volt If you havea 240 volt lamp that is drawing .5 amp then it is using 120 Watts
To convert watts to amps at 120 volts, use the formula: Amps = Watts / Volts. For 1500 watts at 120 volts, the calculation would be: 1500 watts / 120 volts = 12.5 amps.