Wiki User
โ 13y agoTo determine how many cables are needed, we need to know the maximum allowable amperage each T-9 cable can handle. Once we have this information, we can divide the total amperage needed (1600A) by the maximum allowable amperage of the T-9 cable to find out how many cables are required to supply the ship with 1600 amps.
Divide the 1600 w by the 120 v and the answer is 13.33 amps. If you don't know the power factor for the equipment, increase the result by 20% to 16 amps.
To calculate the amperage, you need to know the voltage of the circuit as well. You can use the formula: Amps = Watts / Volts. If the voltage is 120V, then 1600 watts / 120 volts = 13.33 amps.
To calculate the amps, divide the power in watts by the voltage. If the voltage is 120V, then 320 watts would be approximately 2.67 amps.
A 100 amp service will supply your electrical current needs UP TO 100 amps.When doing load calculations on a 100 amp panel it can only be loaded up to 80 amps.
A 18000 watt generator supplying power at 240 volts would supply 75 amps (18000 watts รท 240 volts = 75 amps).
Divide the 1600 w by the 120 v and the answer is 13.33 amps. If you don't know the power factor for the equipment, increase the result by 20% to 16 amps.
as much as you can
62.5 amps
To calculate the amperage, you need to know the voltage of the circuit as well. You can use the formula: Amps = Watts / Volts. If the voltage is 120V, then 1600 watts / 120 volts = 13.33 amps.
Amps for an oven are governed by the total wattage of the oven and what the voltage supply to the oven is.
To calculate the amps, divide the power in watts by the voltage. If the voltage is 120V, then 320 watts would be approximately 2.67 amps.
It depends on the supply voltage watts = current in amps times the supply voltage
A 100 amp service will supply your electrical current needs UP TO 100 amps.When doing load calculations on a 100 amp panel it can only be loaded up to 80 amps.
Any value - you must supply the resistance.
A 18000 watt generator supplying power at 240 volts would supply 75 amps (18000 watts รท 240 volts = 75 amps).
A 6kw load on a 240volt circuit is 25amps.
To answer this you have to know how many volts will be used. If you know the voltage then you can calculate the current by dividing voltage into wattage. For example; an electric heater rated at 700 watts when plugged into a 115 v outlet will draw 700/115 = 6.08 amps of current.