If you want your bulbs to last longer then use 130 volt bulb on a 120 volt system. The light emitted by a 130 volt bulb, when comparing it to a 120 volt bulb, will be a bit dimmer.
Choose a bulb with the same voltage as your fixture to prevent damage or risk of overheating. If the fixture specifies 120 volts, use a 120-volt bulb. If in doubt, consult the manufacturer's instructions or a professional electrician.
Yes, for about .1 second, then it will blow the lamp. A 9v battery will however light three 3.5v lamps.
Yes, a 12 volt auto light bulb can work on 12 volt AC, but the light output might be slightly lower compared to when using DC. The bulb will still produce light, but it may flicker due to the alternating current.
A 13.5 volt bulb will burn less brightly but last longer.
12 volts is enough for a 12-volt 100-watt light bulb. It would not be enough for a 120-volt or 240-volt bulb.
36-volt bulbs are easily found, try Amazon.
Yes a 220 volt light bulb will run on a 120 volt circuit but at 1/4 of the wattage that the light bulb is rated at. A 100 watt light bulb on 220 would would be equal to a 25 watt light bult on 120 volt system.
It depends on the size and wattage of the light bulb. In general, a regular household light bulb would require more than one 1.5 volt battery to light up, as most standard household light bulbs operate on higher voltages (typically 120 volts in the US).
Yes it it is a 12 volt DC light bulb. It will not operate a household 120 volt light bulb.
Yes, for about .1 second, then it will blow the lamp. A 9v battery will however light three 3.5v lamps.
Yes, a 12 volt auto light bulb can work on 12 volt AC, but the light output might be slightly lower compared to when using DC. The bulb will still produce light, but it may flicker due to the alternating current.
Um, a 5 volt light bulb?
Yes, you can use a 130 volt light bulb on a 120 volt supply. The light bulb will still work, but it may not shine as brightly or have as long a lifespan compared to when used on its rated voltage.
All other things being equal, an incandescent light should not "flicker" whether it is connected to 120 or 130 VAC.
A 13.5 volt bulb will burn less brightly but last longer.
Yes, you can easily use it. Just install it as you would any other 120 volt light fixture and change the bulb from a 240 volt bulb to a 120 volt bulb. It will work just fine.
From stores which sell light bulbs for flashlamps.
12 volts is enough for a 12-volt 100-watt light bulb. It would not be enough for a 120-volt or 240-volt bulb.