When polystyrene dissolves in acetone, the solution appears cloudy or milky due to the dispersed polymer chains. During the dissolution process, acetone evaporates, and the gas given off is acetone vapors.
Yes, mainly there are 3 types of acetone: regular acetone, acetone with enriched formula, maximum strength acetone.
Assuming the density of acetone is 0.79 g/ml, and the molar mass of acetone is 58.08 g/mol, you can calculate the number of acetone molecules in 330 ml using Avogadro's number. This will give you approximately 6.69 x 10^23 molecules of acetone in a 330 ml bottle of acetone.
No acetone is an organic ketone solvent.
To make a 50% acetone control, you can mix equal parts of acetone and water. For example, if you start with 10 ml of acetone, you would add 10 ml of water to make a 50% acetone solution.
bleach
super glue remover ANS 2 - Heat it with a good hairdryer or hot air gun, then remove with acetone.
When polystyrene dissolves in acetone, the solution appears cloudy or milky due to the dispersed polymer chains. During the dissolution process, acetone evaporates, and the gas given off is acetone vapors.
If you rub acetone on super or Krazy glues it will soften them enough that they can be peeled off, or will disappear entirely if a small piece. Acetone is a solvent for these glues.
Soak the area in an acetone based nail polish remover. It should loosen up, and come right off.
Use acetone finger nail polish remover. The design sheet is made of acrylic so the "regular" nail polish remover will get it off. The non acetone type won't get it off. Any cheap type will work, but it has to say "acetone" on the bottle.
Acetone
acetone can be really helpful but if you pain your nails a lot it can get into your skin and irritate. but acetone can get sharpie off of your skin and can get super glue off of your nails and skin. personally i wouldn't want that on my nails all the time.
The best way to do this is to get some pure acetone (can find at a beauty salon), q-tips, and a little ice. Dip the q-tip in the acetone then rub off the rubber cement. Apply ice to help with the burning afterwards. Be sure you are not allergic to acetone.
Use acetone (found in nail polish remover, unless yours is acetone free).
No, acetone is not a solvent for oil. If motor oil or similar, use gasoline first, then Goof-Off to finish.
To remove glue from jeans, you will need acetone. Rub acetone on the glue and then wash with soap and water.