No, it is not safe to replace a 250V 10A fuse with a 125V 15A fuse. The voltage rating of the fuse must be equal to or greater than the system voltage, and the amperage rating must be equal to or lower than the rated current of the circuit. Using a lower voltage or higher amperage fuse can lead to safety hazards, including potential fire risks.
Yes, you can use a 10A 250V power cord on a TV that supports input of 100-240V. The current rating of the power cord (10A) is within the range supported by the TV. Just ensure the plug fits securely into the TV's power input.
No, it is not safe to substitute a 10A 250V plug with a 6A 240V plug. The ampere rating of the plug needs to be compatible with the device's power requirements to avoid overheating or damage. It is recommended to use a plug that matches the original specifications of the device.
To determine the appropriate fuse size for a 10A heater, you should ideally use a fuse with a rating slightly higher than the device's operating current. In this case, a 15A fuse would be suitable to allow for a margin of safety while still protecting the circuit from overcurrent conditions.
The fuse that controls the wipers on a Ford Transit Connect is typically found in the fuse box. It is often labeled as "WIPER" or "WINDSHIELD" and is usually a 10A or 15A fuse. If your wipers are not working, check this fuse first to see if it needs to be replaced.
2C:35-10A NEW JERSEY TITLE 2C (Criminal Code) Possession of a Controlled Substance
no
Yes because it is of a higher rating. But make sure your equipment can take the rating too.
Yes, you can use a 10A 250V power cord on a TV that supports input of 100-240V. The current rating of the power cord (10A) is within the range supported by the TV. Just ensure the plug fits securely into the TV's power input.
I have a T10L 250V fuse in a control system and don not know what amperage this is. Can someone help ?? You can replace a 400ma fuse with a smaller amp fuse but never with a larger amp fuse. The amperage of the fuse is written on the fuse somewhere. If it has a 125 volt fuse then replace it with a 125 volt fuse. I got that, thanks!! The problem is that there is no amperage indicated on the fuse, only the T10L, and I was wondering if this is just the type of fuse, or if it was a codification of the amperage, like a 10A delayed or something... Class T fuses are non-renewable, current-limiting, and conform to UL 198H. Current ratings range from 0A to 1200A for 300V rated fuses, and 0A to 1,200A for 600VAC rated fuses (DC ratings are also available). The interrupting rating is 200kA rms symmetrical and these fuses are designed for protection of feeders and branch circuits in accordance with the NEC. Class T fuses must be labeled "Current Limiting", and may be labeled "Time Delay" if they pass time-delay requirements. I can find no listing for a T10L fuse in this class, so I cannot find the amp rating on this fuse. My guess is that it is a 10 amp fuse, which is far greater than a 400 ma fuse. So my answer is no, you cannot use this fuse.
No, it is not safe to substitute a 10A 250V plug with a 6A 240V plug. The ampere rating of the plug needs to be compatible with the device's power requirements to avoid overheating or damage. It is recommended to use a plug that matches the original specifications of the device.
120
The 312 designation means that it is a 312 series fuse made by a company called Littelfuse. This is a series of fast acting, glass cartridge fuse. Knowing the series allows you to look up the exact specifications for the fuse at the company's website. The fuse would have a rating impressed into one if the steel caps that looks like: 250V 312 5A Indicating it is a 250 Volt, 5A fuse, and is a Littelfuse 312 series, which implies fast acting, specific performance specifications and its size (31.75+/- 1.12mm x 6.25 +/- 0.3mm).
Rr t/lps its a 10a fuse
he man they got a #10a fuse in my 1993 vic.and i just needed to replace it so you may wanna try this quick fix!!!!!!!!!!!!!!
Engine bay fuse box (10A Radio Clock)
Under the hood #4 10a
Fuse 7: 10A Red; Buzzer Module, Stop Lamps Fuse