0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Can you use a 240 Henry hoover on 110 volt?
No, you cannot use a 240-volt Henry Hoover on a 110-volt power supply as the voltage difference is too high. Attempting to do so can damage the appliance and pose a safety risk. It is important to always use appliances with the correct voltage rating to ensure safe operation.
Can 120V cloth iron be used in 240V?
No, a cloth iron designed for 120V should not be used with 240V as it can cause overheating and damage to the iron. Using the incorrect voltage can also pose a safety hazard. It's best to use appliances with the correct voltage to avoid any potential risks.
Do you need a 240 volt fuse in each leg of a 240 volt circuit or should you use two 120 volt fuses?
For a 240 volt circuit, you should use a 240 volt fuse in each leg for proper protection. Using two 120 volt fuses is not recommended as it could lead to safety hazards and may not provide adequate protection for the circuit.
Can you use 230 volt appliance in a 240 volt plug socket?
Yes, you can typically use a 230V appliance in a 240V plug socket without any issues. The slight voltage difference is unlikely to cause damage to the appliance. However, if the appliance is sensitive, it's always best to refer to the manufacturer's guidelines or use a voltage converter for added safety.
Were would 240 volt plugs be in a house?
240 volt plugs are typically found near large appliances that require higher voltage, such as electric dryers, stoves, or air conditioners. They may also be located in dedicated utility rooms or in the garage for tools or equipment that require higher voltage.
Can you use 110 volt batteries charger here in Australia?
Not unless you have a 110 volt supply to plug it in to. The standard General Power Outlet in Australia is 240 volts AC at 50 Hertz.
Can you use a 240 Henry hoover on 110 volt?
No, you cannot use a 240-volt Henry Hoover on a 110-volt power supply as the voltage difference is too high. Attempting to do so can damage the appliance and pose a safety risk. It is important to always use appliances with the correct voltage rating to ensure safe operation.
How do you check the 120 volt plug on 1994 diesel club wagon?
Use a volt meter Plug a 120 volt accessory into it
Can 120V cloth iron be used in 240V?
No, a cloth iron designed for 120V should not be used with 240V as it can cause overheating and damage to the iron. Using the incorrect voltage can also pose a safety hazard. It's best to use appliances with the correct voltage to avoid any potential risks.
Why use 12volt lighting rather than 240 volt?
Because 240 volts is dangerous
Do you need a 240 volt fuse in each leg of a 240 volt circuit or should you use two 120 volt fuses?
For a 240 volt circuit, you should use a 240 volt fuse in each leg for proper protection. Using two 120 volt fuses is not recommended as it could lead to safety hazards and may not provide adequate protection for the circuit.
Can you use 230 volt appliance in a 240 volt plug socket?
Yes, you can typically use a 230V appliance in a 240V plug socket without any issues. The slight voltage difference is unlikely to cause damage to the appliance. However, if the appliance is sensitive, it's always best to refer to the manufacturer's guidelines or use a voltage converter for added safety.
Your medical machine says 110240 can you use it in a 240 volt system in cuba?
If you mean 110/240, yes, but there may be a hidden switch to switch it to 240 volt mode. Check the manual.
How do you work out German 240 volt appliance with british electrics?
Both Britain and Germany use the same supply voltage, so the only problem is getting the right plug.
Do they use 110 transformer boxes in Australia?
Not unless you have a 110 volt supply to plug it in to. The standard General Power Outlet in Australia is 240 volts AC at 50 Hertz.
Were would 240 volt plugs be in a house?
240 volt plugs are typically found near large appliances that require higher voltage, such as electric dryers, stoves, or air conditioners. They may also be located in dedicated utility rooms or in the garage for tools or equipment that require higher voltage.
Can you use a 120 volt lamp where a 240 volt lamp was used?
No, the bulb would last about 5 seconds... if that.
