Wiki User
∙ 11y agoIf you are using typical residential voltages ( 120v/240v) a 40 amp breaker is plenty big enough. You could even use a twenty amp breaker.
Wiki User
∙ 14y agoWiki User
∙ 14y agoNo you can't! If it's a 220 volt system. Then 220 * 40 = 8800 Watt maximum energy output.
To determine the hydro usage of a 4800-watt heater, you would need to know the length of time the heater is running. For example, if the heater runs for 1 hour, it would use 4.8 kWh (4800 watts x 1 hour = 4800 watt-hours = 4.8 kWh) of electricity. You can calculate the usage by multiplying the wattage of the heater by the number of hours it is in operation.
Yes, a 30 amp double pole breaker would be suitable for a 4800 watt wall heater. Since watts equals volts multiplied by amps, this wall heater on a 240-volt circuit would draw 20 amps (4800 watts/240 volts), which is less than the 30 amp capacity of the breaker.
Current in amps = watts/ voltage in volts. If you have a 240 volt supply, it will draw 4800/240 = 20 amps, so no. This is a very powerful water heater, and would normally be wired into a dedicated circuit, presumably with a 30 amp breaker.
48 meters VAMSEE ;9492732045,9248124754
To convert 4800 meters to miles, divide by 1609.34 (number of meters in a mile). 4800 meters is approximately equal to 2.98 miles.
To determine the hydro usage of a 4800-watt heater, you would need to know the length of time the heater is running. For example, if the heater runs for 1 hour, it would use 4.8 kWh (4800 watts x 1 hour = 4800 watt-hours = 4.8 kWh) of electricity. You can calculate the usage by multiplying the wattage of the heater by the number of hours it is in operation.
Yes, a 30 amp double pole breaker would be suitable for a 4800 watt wall heater. Since watts equals volts multiplied by amps, this wall heater on a 240-volt circuit would draw 20 amps (4800 watts/240 volts), which is less than the 30 amp capacity of the breaker.
4800 watts because watts = volts x amps.
Current in amps = watts/ voltage in volts. If you have a 240 volt supply, it will draw 4800/240 = 20 amps, so no. This is a very powerful water heater, and would normally be wired into a dedicated circuit, presumably with a 30 amp breaker.
5.5% of 4800= 5.5% * 4800= 0.055 * 4800= 264
4800
That is 4800
90% of 4800 = 4320= 90% * 4800= 90%/100% * 4800=43200/10= 4320
The value of 4800 is 4800 and probability has nothing to do with it.
30% of 4800 = 144030% of 4800= 30% * 4800= 0.30 * 4800= 1440
400 x 12 = 4,800
91% of 4,800 = 91% * 4800 = 0.91 * 4800 = 4,368