0
Yes, an extractor fan can be wired together with a light switch so that they both turn on and off simultaneously. This setup is common in bathrooms where the fan is typically activated along with the light to help with ventilation. It is important to follow electrical codes and guidelines when doing any wiring work.
Add your answer:
Earn +20 pts
You have three 3-way switches operating 3 ceiling lights you want each switch to operate each single light What do you do?
To have each switch operate a single light, a 3-way switch must be installed for each light. Each switch needs to be wired to its respective light, with one wire running between the switch and light fixture. This way, each switch will control the light it's connected to independently of the others.
Why wont your downstairs light switch work when its turned off by upstairs switch?
This issue could be caused by a faulty 3-way switch or improper wiring. It's possible that there is a loose connection or a wiring problem in the circuit. It's recommended to have a qualified electrician inspect and repair the electrical system to ensure safety and functionality.
How do you wire a 220 volts light?
The light is wired the same as any voltage fixture. Bring the source voltage to the fixture and connect it to the two fixture wires. If you want to control the off-on of the fixture take the source voltage to a switch first and then out of the switch to the light fixture.
What will happen if the two switches connected to light up a single bulb are on?
It is dependant on whether the switches are in wired in a parallel or series configuration. If the switches are wires in parallel then both switches would have to be off to turn the light bulb off. Either switch could turn the light bulb on. If the switches are wired in series then both switches would have to be on to turn the light bulb on. Either switch could turn the light bulb off.
What would you need to install to control a light from five locations?
To control a light from five locations, you would need a multi-location smart switch or dimmer that supports multiple switch locations. This typically involves replacing the existing switches with compatible smart switches at each location and ensuring they are properly wired and configured to work together. Alternatively, you could use a wireless smart lighting system that allows remote control of the light from various locations using a central hub or app.
If you have a light and one switch that controls it what are the light and the switch wired in?
A light controlled by a switch are necessarily wired in "series", meaning that the electricity must pass through all components if the circuit is to operate correctly, assuming you actually have a source of electricity wired in as well.
How do you know that house lights are wired?
When you turn the light switch to the up (on) position, if the bulb is not burned out, the light bulb will glow.
Is it still within code to run power from panel to light switch then to light?
You can either go to switch or to light first. I wired house for my brother ran power supply from junction box then to each switch then to light. Passed inspection no problem
How do you ad and extra switch and light to the same 2 by 4 box?
There are multiple ways to wire a switch. If power is fed into the switch box, a second light would be wired one way, if power is fed into the light box, the second light would be wired a different way. This seems like it would be a task better given to a qualified electrician or local handyman.
What way is Chicago?
A 3 way switch wired ---- , but works A 3 way switch wired not to code ---- , but works A 3 way switch wired not to code but it works
Where is the parking light relay located on a 90 Honda Civic?
There is no relay. They are wired directly to the headlight switch.
Is a stop switch wired in series?
A stop switch is wired in series with the power supply and the load.
Why on a 99 Chev Lumina are high mount brake light working signals and 4ways but not brake lights?
probably your blinker switch (multi-accessory switch). The high mount brake light is wired directly from the switch on the pedal but the rear two lights are wired through the pedal switch and then through the the blinker switch on the steering column. Almost all of those blinker switches go bad.
Can a bulb work as a switch?
First answer: No. Second answer: Yes. A light bulb is a resistance. Current flows across a tungsten filament, heating it to produce light. However, if there was some other resistance wired into a closed circuit, a screw type bulb could be used as a switch. You unscrew it to throw open the circuit, effectively turning off whatever else was wired in the line. Screw it back in to switch it on. So yes, you could use a light bulb as a switch. Some switches have LED (light emitting diodes) built into them so they light up when the switch is closed, and turn off when the switch is open. And some switches are wired just the opposite, so the LED is on when the switch is off. This makes these types of switches easier to find in the dark.
Why wont my 1997 doge intrepid that wont start but the alarm keeps going off?
I don't know if this will help, but I had a similar problem and it was a short in the light switch. Because the alarm was wired into the light switch. I wiggled the switch and it started. Change it.
You have three 3-way switches operating 3 ceiling lights you want each switch to operate each single light What do you do?
To have each switch operate a single light, a 3-way switch must be installed for each light. Each switch needs to be wired to its respective light, with one wire running between the switch and light fixture. This way, each switch will control the light it's connected to independently of the others.
How could you use mercury to make a switch to turn on a light when the trunk of a car is open?
You do not need mercury. Just install a door jam switch in the trunk wired into a light in the cat so that when the trunk is open a light will come on in the vehicle.
