it is a drum that has a solid bottom with a hole on it's side that is used for adding or draining water, and a buckskin top. When it is beaten, the buckskin gets wet and the sound (depending on how much water is in the drum) resonates with a kinda, toomp toomp sound. Most are small hand held size, but I believe some of the ones made in the earlier days were made from hollowed out stumps and were often large in size.
An ear drum bursts by water putting pressure on the back of it.
It is the metal part around the outside of the drum that is around the drum head.
Drums or main drums. they are the main beat source during music.
Bass drum. The bass drum in a trap set is also called the kick drum.
A bass drum hoop is the outer rim of the bass drum that sandwiches the bass drum head to the actual shell of the bass drum.
mud drum means water drum or feed water drum
Im talking about the iroquois
A "drum" is not a recognised measure for liquids.
The full drum. Answer It depends a drum a quarter full is almost impossible to roll but a drum that is completely full will although heavier roll easier.
After the dropping have dffused into the water in the water in the drum dilute the concentrate and water your plants.
The steam drum separated the steam from the water and stream mixture in the boiler drum.
probably to travel on water
There is no such measurement as "a drum of water" . There are currently at least 50 'barrels ' in use. -Pick one.
well the the Iroquois used weapons to hunt wooly-mammoths but they didn't have technology like we have today but someone introduced them to horses so they wouldn't have to hunt on their feet again and thats pretty much it for how the Iroquois did their life back then
Water escapes from wet clothing in a spinning clothes dryer due to centrifugal force. As the drum rotates, the water is forced outwards towards the walls of the drum, while the clothing remains against the drum. The water then drips down the sides of the drum and into the drain, helping to dry the clothes faster.
An ear drum bursts by water putting pressure on the back of it.
Measure the height of the drum with a tape measure. Divide the total height by 5. Multiple this result by 4. This will tell you how high the water must be in the drum to make 4 gallons. Make a mark on the inside of the drum at that height and fill the drum to the mark. Fill up the drum and then pour out one gallon.