Cork grease is not needed on a trumpet, as there is no cork to grease!
the French Horn is a brass instrument. When you put in together you simply put the mouthpiece in the neck and your done. Cork grease is used for wind instruments like the clarinet. when you put together a clarinet you put the mouthpiece into the neck, but the mouth piece is lined with cork so u also apply cork grease (hence the name, "cork" grease). But seeing as the French Horn has no cork you do NOT need cork grease.
Be careful because you don't want to break it but take some cork grease and coat the cork showing with lots of cork grease. Then carefully and slowly push the mouthpiece even further onto the cork and neck piece but NOT TOO MUCH!! If you have put enough cork grease on then you should be able to spin the mouthpiece around a few times and pull the mouthpiece off the cork and neck piece with maybe a little bit of trouble but it should work. I do this all the time and once you get the mouthpiece off, cover the cork with cork grease and if possible replace the cork with a new one and make sure to put cork grease on it regularly to prevent this from happening again.
you need cork grease fora clarinet so when you try to put the pieces together it would be easier to put on
Cork grease. :)
Cork grease is not needed on a trumpet, as there is no cork to grease!
the French Horn is a brass instrument. When you put in together you simply put the mouthpiece in the neck and your done. Cork grease is used for wind instruments like the clarinet. when you put together a clarinet you put the mouthpiece into the neck, but the mouth piece is lined with cork so u also apply cork grease (hence the name, "cork" grease). But seeing as the French Horn has no cork you do NOT need cork grease.
Be careful because you don't want to break it but take some cork grease and coat the cork showing with lots of cork grease. Then carefully and slowly push the mouthpiece even further onto the cork and neck piece but NOT TOO MUCH!! If you have put enough cork grease on then you should be able to spin the mouthpiece around a few times and pull the mouthpiece off the cork and neck piece with maybe a little bit of trouble but it should work. I do this all the time and once you get the mouthpiece off, cover the cork with cork grease and if possible replace the cork with a new one and make sure to put cork grease on it regularly to prevent this from happening again.
you need cork grease fora clarinet so when you try to put the pieces together it would be easier to put on
Cork grease. :)
No.
if your clarinet is having trouble fitting together try some cork grease!
Cork grease is a substance that "greases" the corks on any woodwind instrument. This makes it much easier to put together. If corks do not get greased enough, they will tear and fall off. If cork grease is not available Vaseline can be used but must be wiped off before storing your instrument. Vaseline penetrates cork, occasionally loosening the glue. Therefore adding small amounts of hard waxes such as carnuba , beeswax etc., over very gentle heat, can make wonderful cork grease with custom tailored consistency.
Yes. Cork grease is usually made from the same ingredients as vasiline or chapstick. All three can be used as slide grease on brass instruments on tuning slides. Do not use it on valves or trombone slides though.
sorry i can't be more helpful, but i think cork grease is your only option.
Putting cork grease on your lips is not recommended as it is not designed for contact with skin. It can cause irritation, dryness, and discomfort. It is meant to be used on cork parts of instruments to reduce friction and help with assembly.
You will need recorder grease for a wooden recorder, and recorder cream for a resin/plastic recorder. On either one, use your finger to smear the grease on the joints of the recorder. On a wooden recorder, the joint will be made of cork or string.