You can try to wax it as long as the wood is coated.Alot of brands sell polish and wax for Guitars.Those might be the best for your guitar.
I would however disadvice to wax an uncoated wood.
A music man bass electric guitar is made of the standard materials. They differ, but are mainly made of wood, metal, strings, wax, paint, and a little bit of magic.
I believe so? Personally i reccomend using acetone on UNPAINTED areas on the pet. Be very cautious when using it, because it is highly errosive to the paint. As for the painted areas, soap and water, with good and gentle scrubbing should do the trick.
to put pickup covers on any guitar is easy. for Gibson and epiphone, you basically use the same cover brand, just you might have to get the size specifications. just grab a fat candle so that when melted, the wax is in like a wax pool near the wick. melt the wax and pour a small portion into pickup cover. then, as quickly as possible, grab the pickup and insert into cover. wait until cooled. insert back into guitar
the best string size for this is 8-38 but their very quiet and break easily. its best to just stick with light gauge 9-42 until your fingers develop strength. Think of it like weight training. My advice is to lower the action as its much easier if your strings are low to the fretboard and of course lower tunings aren't as brutal to your fingers.
She gets a Brazilian wax
Wood wax is a type of varnish/polish
It is ok to use wax on some wood furniture. A better idea is to follow the instructions that came with the furniture as to it's care. Most of the time wood furniture responds nicely to a store bought polish or oil.
"Bella cera" translates to "beautiful wax" in Italian. It can refer to a high-quality wax or polish used for wood furniture or flooring. It can also symbolize elegance and beauty.
Wax is commonly used to make candles, crayons, lip balm, and wax seals. It is also used in certain art mediums, for waterproofing, and as a polish for wood and leather.
It depends on your definition of car polish, polishing compounds take a little of the corrosive glaze that eventually attacks all paint jobs. Car wax puts a film of wax polish to protect the paint job. Many automobile painters I have conferred with tell me if you want to restore the paint job use polishing compound and then put a coat of wax polish on it. Polish if meant as car polish would be just like car wax it puts a film of polish on the paint to protect it. I do not have the information about the brand of polish, for that I would consult the internet.
Mop & Glo is a type of liquid wax for vinyl flooring that you might polish by mopping.
A wax based polish.
polish it with a cutting compound and then wax after and cut it with a buff
I can tell you of an Indian brand of wax polish which has more than 60 years of rich history behind it - Dazlo (Regd.) Wax Polish. It is pure and is being made from the most traditional waxes from the nature. It is perfect to apply and leaves the surface shining like new. It can be applied to a wide range of floors and furniture. Even before Reckitt began manufacturing Mansion Wax Polish in India, Dazlo (Regd.) Wax Polish was being manufactured and sold across India. Email: waterloo.india@gmail.com , info@waterlooindia.com Ph.:+9198107-80575
The main difference between car polish and car wax is that car polish actually cleans the car's surface, but car wax is more of a sealant or top coat to use on an already cleaned vehicle. Ideally, one may wish to use car polish and then car wax in that order for a clean, shiny, and protected finish.
First, scrape off as much wax as you can using a plastic lifter, the kind you use on teflon pans. If there are indentations in the wood, use a smaller tool, even a wooden toothpick for small spaces. Try not to use metal utensils which will damage the wood. Once you have removed as much wax as possible using this method, remove the rest with hot water and soap. Fill a bowl with the hottest water you can tolerate using rubber gloves. Dip a cloth in the water and wring out the cloth before applying it to the wood. The heat in the cloth will melt the wax into the cloth. Keep doing this until the wax is gone. Dry the wood immediately with a dry cloth. When the wood is completely dry, apply a coating of oil or furniture polish depending on what type of finish is already on the mantle. If the mantle had a varathane coating, the oil or funiture polish won't be necessary. Dump the water from the bowl outside to keep the wax out of your drains. - Dave.
Natural wax polish is typically based on a blend of natural waxes such as beeswax, carnauba wax, and plant oils such as linseed oil. These ingredients provide a protective layer to wood or furniture surfaces, enhance shine, and offer some level of water resistance.