To reset the code on a Sentry safe, you typically need the original factory code or access to the safe. If you have the factory code, open the safe, locate the reset button (usually on the inside of the door), and follow the manufacturer's instructions to set a new code. If you've lost both the code and key, you may need to contact Sentry's customer service for assistance or consider a locksmith. Always refer to the specific manual for your model for detailed instructions.
If you want to reset your code for your safe, you must first remember the original code. If you cannot remember the original code, you will need to contact customer service for assistance.
To reset the Audi radio code when it displays "SAFE 2," you'll need to enter the correct security code. First, turn on the ignition but keep the radio off. Then, hold down the "TP" and "RDS" buttons simultaneously until "SAFE" appears. After that, use the radio preset buttons to enter the code, followed by pressing the "TP" button to confirm. If you don't have the code, you may need to consult your owner's manual or contact a dealer for assistance.
remove the radio of the car than it will be a # on the radio call your locar vw service dealer to ask for the code.
By taking the cable off battery putting back on reset code
with the radio s/n number you will have to get the reset code through a Honda dealer with the radio s/n number you will have to get the reset code through a Honda dealer
have code need to change
A keypad controlled Sentry safe is opened by entering the correct code into the keypad. It prevents those without the correct code from opening it.
Thia all depends on which code you are trying to change. The digital electronic code that comes with the safes can not be changed. what you need to do is program a user code into the sentry safe which can be re programed by the safe owner's. This is the only code you want to give out as only the user code can be changed. please follow this link for Sentry Safe programing instructions. Just scroll to the middle of the page on this page http://www.a1qualitysafe.com/page/212853
To open a Sentry safe without a key, you can try contacting Sentry's customer service for assistance, as they may provide a replacement key if you can verify ownership. Alternatively, if the safe has a combination lock, you can attempt to reset it using the factory reset method, typically found in the user manual. For more complex locks, it might be necessary to hire a professional locksmith. However, attempting to force open the safe can damage it and void any warranty.
The Sentry G5241 14 gun safe weighs 170 lbs (according to the Sentry website)
Contact Sentry or a qualified locksmith.
If you want to reset your code for your safe, you must first remember the original code. If you cannot remember the original code, you will need to contact customer service for assistance.
You will need to contact Sentry or a good locksmith.
Try the link to Sentry.
No reset is necessary.
go to sentry.com and it tell you how to get the master code. you must fax them a letter stating that you are the owner and pay then $15 and they will email you the code.
If you have the SN (usuall a small sticker on safe) you can write to Sentry and they will send you the combination with the proper paper work.