just change the set and keep the old ones that haven't broken, you're only saving 4-7$ and repairing them would make them sound terrible if people found a way. YouTube can show you exactly how to do so.
Greatly depends on how often you play, maintenance and type of strings.
If you play daily and gig often it is ideal to change your strings at least once a month. If your gigs are more spread out or none at all and you play every other day then it is recommended to change every 3 months.
To prolong string life, wash and dry hands prior to playing so you do not get excess oils and dirt on the strings also with a clean polish cloth wipe the strings when you are done playing. There are also string conditioner products you can buy at your music store, dunlop make one I like, as well as body polish and oil for the fretboard.
To add more life to your strings you can buy coated strings which last longer and help prevent dead skin and oils from getting inside the string's. The negative side to coated strings is they have a different sound than uncoated strings and over time the coating can flake.
Damage to strings is caused by atmospheric conditions where the guitar is kept such as air moisture but the major cause of string damage is the oils, dirt and dead skin from our fingers. These all get strapped inside the coiling of the strings, specifically the lower strings, which will effect the overall vibration of the strings and smoothness under your fingers. This is inevitable but with the above mentioned maintenance you can prolong it from happening.
Dependent upon where the string is broken, it is possible to fix it. If it has broken at the tuning peg, chances are you'll have to replace it unless, there is enough string on the "long" side of the break to wind around the tuning post. If the string has broken near the bridge, you can take the string out, feed the broken end through the hole in the middle of the ball-end as so: (broken end) (ball-end)----------------------------- >> O| (bit of broken string still attached)Then, you must double back the string and twist it until the ball-end is securely fastened in the "noose" you have made with the string. Rewind the string onto the guitar, and assuming you had enough string to perform this operation, it should work fine.
How long is a piece of string?! It depends on the model, the best idea is to take it into a respectiful musical instrument shop.
range as in what would be the thickest to be considered a B string right? if so with regular guitar strings 11 on a 9-42 set 13 on a 10-46 set 14 on a 11-49+ set some companies do 11-50 ..ect 15 on a 12-52 set (give or take) 17 on a 13-56+ set What is interesting about guitar strings is you can use say a high E string in say an 11-50 set you can use that as a B string for a light gauge of strings. It's all about comfort I mean as long as your B string isn't thicker than your G string. The rule of thumb is the thinner the string the higher they can tune as well.
Paint and gloss (to protect it from getting scratched again)
There are several online websites that will sell parts to repair a Fender electric guitar and instructions. One can also take the guitar to their local guitar selling store or music instrument store to find out locally where one can get the guitar repaired by a professional.
Dependent upon where the string is broken, it is possible to fix it. If it has broken at the tuning peg, chances are you'll have to replace it unless, there is enough string on the "long" side of the break to wind around the tuning post. If the string has broken near the bridge, you can take the string out, feed the broken end through the hole in the middle of the ball-end as so: (broken end) (ball-end)----------------------------- >> O| (bit of broken string still attached)Then, you must double back the string and twist it until the ball-end is securely fastened in the "noose" you have made with the string. Rewind the string onto the guitar, and assuming you had enough string to perform this operation, it should work fine.
How long is a piece of string?! It depends on the model, the best idea is to take it into a respectiful musical instrument shop.
Take it to a guitar repair guy. You probably need adjustment of your bridge or neck.
about as long as a piece of string
The answer will depend on the fibres that the string was made from and also on how it was treated.
yes, you can use your fingers or a knob winder to loosen the strings(hold the string while you do this), keep winding until your string pops off. If your strings are old or semi-old you might want to change them.
It is broken. Take it to a repair shop or buy a new one.
range as in what would be the thickest to be considered a B string right? if so with regular guitar strings 11 on a 9-42 set 13 on a 10-46 set 14 on a 11-49+ set some companies do 11-50 ..ect 15 on a 12-52 set (give or take) 17 on a 13-56+ set What is interesting about guitar strings is you can use say a high E string in say an 11-50 set you can use that as a B string for a light gauge of strings. It's all about comfort I mean as long as your B string isn't thicker than your G string. The rule of thumb is the thinner the string the higher they can tune as well.
take off all the old ones and than put new ones on, you may have to adjust the action and neck on the guitar depending on how drastic the string gauge swap is. but 90% of the time I find you dont have to do anything but change the action.
Paint and gloss (to protect it from getting scratched again)
There are several online websites that will sell parts to repair a Fender electric guitar and instructions. One can also take the guitar to their local guitar selling store or music instrument store to find out locally where one can get the guitar repaired by a professional.
Take it down, lay it on your picnic table and try to 'follow' the string and pullies. Some may be worn, broken or rusted. If necessary, remove the strings and pullies and bring them to your local hardware store. Hopefully they might have the string and/or parts. If not, I located the following Umbrella repair site, which has links to parts and repair ideas.