answersLogoWhite

0


Best Answer

There are two special tools that look like keys that are inserted to release locking tabs.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove the radio on a 2003 to 2006 Dodge Sprinter?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Music & Radio

Are 2003 and 2005 Sprinter radios interchangeable?

Yes, but you will need the theft code to match the radio.


How do you replace a radio in a 1996 Dodge Intrepid?

Remove the plastics with a flat head screwdriver (be careful not to break the plastic clamps) surround the face fo the radio. Unscrew (should be four) screws remove radio and make sure to disconnect wiring harness and ground wire. Enjoy.


How do you remove radio from 2003 4 runner?

look on top of the radio there is a tray. grab the top of the tray and pull out there are clips that hold it together then just let it hang from the wires you will see the radio on brackets then just remove the 4 bolts from the bracket and pull the radio out dont forget to remove the conncetions on the back. once you remove the radio there are 4 screws on each side of the radio that is holding the radio to the bracket. remove those to remove radio from bracket. dont lose those screws your going to need them to install on new radio. any more questions e-mail emezahth@gmail.com


On a 2003 Toyota matrix radio what is the aux input for and how do i use it?

Its for installing an auxiliary audio device, like a CD changer or a satellite radio. You have to remove your radio to attach a device to it. There was no auxiliary input in the 2003 Toyota matrix and was not optional the first aux was for the 2006 matrix and up


2003 CTS remove radio?

1. Open the ash tray and remove the felt lined insert, behind it is a bolt you need to remove. 2. With that bolt removed you can pop out the ash tray/climate control unit, and you will be able to see the two bottom bolts for the radio. 3. Above the radio you will need to pop out the ac vent, it isn't screwed in so you just have to pull on it and it will pop out. With the vent removed you will see the top two bolts for the radio. 4. Remove the 4 bolts and the radio will slide out.