In the US at least, no, linear amps are not legal for use on CB radios. The maximum wattage permitted for AM transmission is four watts, and the maximum wattage permitted for Single Sideband is 12 watts.
It takes more energy when the applications are running.
some applications are floatings of ships, submarines, icebergs,man,fish and rising of balloons
Broadcast and cable television operators use long-haul applications
they have online applications on their website
Vestigial sideband (VSB) is a type of amplitude modulation ( AM ) technique (sometimes called VSB-AM ) that encodes data by varying the amplitude of a single carrier frequency . Portions of one of the redundant sidebands are removed to form a vestigial sideband signal - so-called because a vestige of the sideband remains.
With full double sideband AM the bandwidth of the modulated signal is twice that of the baseband information signal. With suppressed carrier single sideband AM the bandwidth of the modulated signal is identical to that of the baseband information signal. With vestigial sideband AM the bandwidth of the modulated signal is somewhere between the above two cases, depending on how much of the vestigial sideband is included.
Explain the difference between the various forms of a.m & f.m and which jutifies the radio station's choice of modulation for each waveband?
Analog tv broadcast systems
AM has a smaller sideband bandwidth than FM, since the baseband bandwidth of NTSC video is already about 4.5MHz, using AM vestigial sideband the resulting bandwidth is only just under 6MHz (without partially suppressing one sideband, the resulting bandwidth would have been about 9MHz). Had FM been used instead the resulting bandwidth might have been around 100MHz instead.
Shasta sideband was created in 1933.
If VSB is used in Television then it is better to design filtering in the receiver side.We can easily reconstruct VSB modulated signal using non ideal filter
Analog modulationIn analog modulation, the modulation is applied continuously in response to the analog information signal.Common analog modulation techniques are:Amplitude modulation (AM) (here the amplitude of the modulated signal is varied) Double-sideband modulation (DSB) Double-sideband modulation with unsuppressed carrier (DSB-WC) (used on the AM radio broadcasting band)Double-sideband suppressed-carrier transmission (DSB-SC)Double-sideband reduced carrier transmission (DSB-RC)Single-sideband modulation (SSB, or SSB-AM), SSB with carrier (SSB-WC)SSB suppressed carrier modulation (SSB-SC)Vestigial sideband modulation (VSB, or VSB-AM)Quadrature amplitude modulation (QAM)Angle modulation Frequency modulation (FM) (here the frequency of the modulated signal is varied)Phase modulation (PM) (here the phase shift of the modulated signal is varied)
single sideband full carrier
Vestigial SideBand. It is a type of signal modulation (filtering) used in the television communication industry. It is used to help remove signal redundancy in Pulse Amplitude Modulated (PAM) signals. Also look up 8VSB and A-VSB which are variants of VSB.
If you subtract from the carrier frequency the frequency of the tone that modulates it, then filter out the carrier frequency, then you have a lower sideband frequency. If you add to the carrier frequency, filter out the carrier, then you have an upper sideband frequency.
In regards to the radio transmission mode, SSB is an improvement of AM, and there are generally three ways single sideband can be generated -- filtering out the unwanted sideband and suppressing the carrier; using phasing to suppress the unwanted sideband and carrier (Hartley modulator); or quadrature mixing and filtering (Weaver modulator).