Both of the theories enhance the prior knowledge and improve the abilities of students to comprehend (input) the language and achieve the fluency (output) in it.
common emitter
the output of P controller depends only on the present state of the input, whereas the output of I controller depends on the whole history of the input. that is the fundamental difference between the control law of two controllers.
In common emitter amplifier circuit, input and output voltage are out of phase. When input voltage is increased then ib is increased, ic also increases so voltage drop across Rc is increased. However, increase in voltage across RC is in opposite sense. So, the phase difference between the input and the output voltages is 180 degrees.
It is an input device.
What is the difference between output and input?If you sing into a microphone you can hear the microphone's output.Sound coming out of the power amp to the speakers.That is the input of the loudspeaker.Do you see the difference?Your voice is the microphone's input. Its output is electrical impulses that are input to the amplifier. The amplified impulses are the output of the amplifier and input to the speaker. Sound waves are output of the speaker and input to your ears.
end of line mark.
The difference between and input force and an output force is that an output force is force exerted by a machine, and an input force is force exerted on a machine.
Depends on what you're referring to. Input could be a switch for example, output would be a fan or light coming on. Eating is an input, you can guess what your output is?
The relationship between work input and work output is defined by the efficiency of a system. Efficiency is a measure of how well a system converts input work into output work and is calculated as the ratio of output work to input work. A higher efficiency indicates a more effective conversion of work input to work output.
Neither. A computer contains both input and output devices. Many modern input and output devices contain embedded computers, that interface between the main computer and the actual input or output hardware of the device.
Input distance is the distance from the input device to the system processing the input, while output distance is the distance from the system processing the output to the output device. These measures are important in various fields such as engineering and technology to ensure efficient and accurate communication between input and output devices.
The input arm is the distance between the input force and the fulcrum. The output arm is the distance between the output force and the fulcrum. The fulcrum is the fixed point around which the pulley rotates.
input and output devices provide a means of communcation between the computer and the outside world.
In a first-class lever, the fulcrum is located between the input force and the output force. In a second-class lever, the output force is located between the fulcrum and the input force. In a third-class lever, the input force is located between the fulcrum and the output force.
Work Input = Work Output + Work done in overcoming friction.Therefore Work Input > Work Output.
The third class lever functions between the input force and the output force