An alternator cannot "short" out for years or even minutes. The definition of a short is a wire or circuit touching ground to cause a fuse to blow. The circuit is too "short" for the current to flow through the proper load and back to the battery. The voltage regulator in a alternator can act up from time to time and cause improper charging from the alternator. Or a component of the alternator can go bad and cause a charging system problem intermittently. Your question needs to be explained better to give a better answer.
Depends on which circuit. It can be from a battery, or a device called a generator, alternator, dynamo, or a magneto.
In DC inductor is short circuited .
A spark from a short circuit can cause a fire .
difference between p type and n type semiconducter materialAnswerInsulation is used to prevent a short current. To protect the circuit should a short-circuit fault occur is either a fuse or a circuit breaker.
short circuit ratio is the ratio of field current to open short circuit voltage n the open circuit current. its value for thermal is less than hydro type.
Ratio of field current required to produce rated voltage in open circuit to the field current required to produce rated current in short circuit.
maximun through the alternator.
Checked Stephen J. Chapman's Electric Machinery Fundamentals page 287. It says: Short Circuit Ratio (SCR) for the synchronous generator is the ratio of the field current required for the rated voltage at OPEN circuit to the field current require for the rated armature current at SHORT circuit.
An alternator cannot "short" out for years or even minutes. The definition of a short is a wire or circuit touching ground to cause a fuse to blow. The circuit is too "short" for the current to flow through the proper load and back to the battery. The voltage regulator in a alternator can act up from time to time and cause improper charging from the alternator. Or a component of the alternator can go bad and cause a charging system problem intermittently. Your question needs to be explained better to give a better answer.
The short circuit capacity of a generator can be calculated by dividing the generator's reactance by the sum of the generator's reactance and the total reactance of the system. This ratio will give you the short circuit capacity of the generator in relation to the total system capacity.
Probably... What ratio? X/R? X0/X1? X0/R0? Xd /Xd''? etc.
Alternators are not in a fused circuit. If your alternator isn't working, it's because either the belt is broken, there is a shorted circuit somewhere, or the alternator is faulty.
1. That if a short circuit occurs we will get a sign before short circuit will happen or not ? 2. what we can do ? 3. how fuse can get a short circuit ? 4. which wires we have to use from preventing short circuit ?
Because the Power Factor is over corrected.
Simple, have the alternator checked and if it is okay, check the alternator circuit to the battery
a bad ground wire can ruin an alternator by not completing the circuit