This is something that can really only be done with a lot of auto-electrical work. The immobilizer is incorporated in the BCM (Body Control Module) which basically controls the car's electrics. It can't really be bypassed unless you really know what you're doing and have a lot of time and/or money to spend on it.
Commodore James Norrington - played by Jack Davenport.
The Commodore 64 Orchestra - 2008 TV was released on: USA: 12 October 2008
Baily's of Balboa
You need to send the Ecu to someone that trickes them and tell them to remove the immobilizer, that goes from around 100 to 300 Euros. You can also tape or glue the key transponder to the rfid reader on the ignition. if you lost all your keys you need to buy a new set off ECU and Keys from a retailler or take them from another similiar car. if you just have one key but not the red one, just go to a keymaker and ask them to copy the key about 30 to 50 euros. if you don´t have time, go and read the car manuals theres a sequence to bypass the imobilizer, you need to introduce a code.
Engine management light is coming up it is also known as engine electronics, electronic immobilizer light shown in owner's manual how can i cure it?
The immobilizer on a VT Commodore must be bypassed before you can tow it. To bypass the immobilizer, remove the body control module.
Holden VX Commodore was created in 2000.
check for key lock left hand front door jamb
First you need to buy a bypass tool from an auto parts store. The next thing you need to do is to plug it into the immobiliser, press go and then you are done.
firstly you need to buy a bypass tool from supercheap auto. Then all you need to do is plug it in to the immobiliser, press go and you're done.
http://forums.justcommodores.com.au/holden-commodore-how-tos/5541-removing-vt-vx-door-trim.html
i dont know much about the vx commodore, but in my Vz commodore i like to put them in my center console and my coke in the cup holder DANNY!!!!!!!!
== ==
Quite likely not! The bumpers on VY's and VX's are quite different to a VP.
english
check your inhibibitor switch
Hi how I can bypass or cut of immobilizer for renalt clio 1998 1.2 8v 59hp imobilaizers is in main block ecu