0
It depends upon how much amperage is utilized in a circuit. A circuit with 2 amps of current and 120 volts would consume 240 watts of power. The same circuit with 4 amps would produce 480 watts. You have to have 2 values of Ohm's law to figure out the third. See "Ohm's law" on the internet for more information on how circuit values are determined.
It depends upon how much amperage is utilized in a circuit. A circuit with 2 amps of current and 120 volts would consume 240 watts of power. The same circuit with 4 amps would produce 480 watts. You have to have 2 values of Ohm's law to figure out the third. See "Ohm's law" on the internet for more information on how circuit values are determined.
Add your answer:
Earn +20 pts
How many amps are in 40 watts?
That depends on circuit voltage. 1 watt is equal to 1 volt times 1 amp.
How fast is 1000w?
The answer is "It Depends" Watts of electircal power is defined as Voltage x Current. Amperage is a unit of current. In most houses in the US the voltage is 120 volts AC. A 100 watt light bulb in the house would have 120 volts across it so the current flowing would be: Watts = Volts x Amps 100 watts = 120 volts x I amps A amps = 100 watts / 120 volts A amps = 5/6 amps ANSWER watts is a product of voltage and current .One quantity will never suffice
What is the power dissipated by a resistor that has 5 amps flowing through it with 120 volts applied?
The power in a resistor (in watts) is simply the product of the current (in amperes) times the voltage (in volts).The power in a resistor (in watts) is simply the product of the current (in amperes) times the voltage (in volts).The power in a resistor (in watts) is simply the product of the current (in amperes) times the voltage (in volts).The power in a resistor (in watts) is simply the product of the current (in amperes) times the voltage (in volts).
How many watt DC to AC converter do you need to run a 6 amp power tool?
The formula for watts (or power) is Amps times voltage. Therefore with a 6 amp draw times 120 volts would be about 720 watts. A 1000 watt power inverter would do the job.
How many watts in 1 volt?
The question doesn't make sense. Watts are the product of volts and amps so you could have 1 V with a current of 1 amp = 1 watt or 10V and a current of 0.1 amps = 1 watt or 100V and a current of 0.01 amps = 1 watt etc.
What does 1500 watts equal in amps at 120 volts?
To convert watts to amps at 120 volts, use the formula: Amps = Watts / Volts. For 1500 watts at 120 volts, the calculation would be: 1500 watts / 120 volts = 12.5 amps.
How many watts are in one amp?
Power (in watts) is equal to voltage (in volts) multiplied by current (in amperes). Therefore, the number of watts in one amp depends on the voltage. For example, at 120 volts, one amp is equal to 120 watts.
How many amps is 450 watts?
To convert watts to amps, you can use the formula: Amps = Watts / Volts. For example, if you're using a 120V circuit, 450 watts would be equal to 3.75 amps (450 watts / 120 volts = 3.75 amps).
16amps how many watts is it?
To calculate watts, you need both amps and volts. If we assume a standard voltage of 120V in the US, then 16 amps would be equal to 1920 watts (16 amps x 120 volts).
How many amps in 3500 watts with 120 volts?
That depends on the voltage, but the residential standard is 240 volt. At that voltage you sit at around 15 amps, however it MUST be on a 20 amp circuit for national (US) or Canadian electrical code, as you can only load your circuit to 80% of it's capacity.
Is 17 watts 120 volts?
No. Watts = Volts x Amps Watts does not directly convert to volts.
How many watts of heat are being produced by the heating of 16 ohms and is connected to a voltage of 120 volts?
The power in watts is equal to the volts times the amps so that is 120 x 7.5.
120 volts plus 500 watts equals how many amps?
To calculate amps, you can use the formula: Amps = Watts / Volts. In this case, 500 watts divided by 120 volts equals approximately 4.17 amps.
How many amps are 1720 watts at 120 volts?
To calculate the amperage, divide the wattage by the voltage. In this case, 1720 watts divided by 120 volts gives 14.33 amps.
How many volts do you need to power 2 watts?
watts = volts x amps, example-2 watts=2 volts x 1 amp, example- 2 watts=120 volts x .60 amp.
How many amps are in 40 watts?
That depends on circuit voltage. 1 watt is equal to 1 volt times 1 amp.
How many watts in 40 amps?
I t depends. Watts = Amps times volts. 40 amps x 120 volts =4800 watts or 40 Amps x 12 volts = 480 watts.
