put the car in drive and crankshaft wont turn anymore. then you can take off the bolt
Turn engine with a socket on the front crankshaft pulley.Turn engine with a socket on the front crankshaft pulley.
Perhaps it is the starter drive. That happened to my riding mower. Got the drive replaced, works fine.
Your flywheel key might be sheared
1st ? is , is it the correct starter for that vehicle?2nd is the battery up to par for starting ?
your electric motor(I assume) probably wont have enough torque, That is on a Riding type mower, not a push mower, it might work on a push mower as long as its not self prepelled, because your motor probably still wont have enough torque!
replace it
starving for fuel
There are many possible reasons. Anything from piston/valve interferance to a bad starter or battery or maybe a bad ground wire. Can you turn the crankshaft by using the crank pully bolt and a ratchet? Do the dash lights come on? There are several things to check to solve this problem.....
get a new one
There is normally a second starter-position solenoid under the clutch pedal. It probably is not getting contacted when you step on the pedal.
because it needs a 1600 vee dub engine in it to make it go faster to have lawn mower races